Information technology - Small Computer System Interface (SCSI) - Part 333: SCSI Stream Commands - 3...
ISO/IEC 14776-333:2013(E) defines the command set extensions in order to facilitate operation of the sequential-access device type. It is implemented in conjunction with the requirements of the SCSI Architecture Model-4 (SAM-4) standard and the applicable clauses of the SCSI Primary Commands-4 (SPC-4) standard. It fully specifies the standard command set for the sequential-access device type.
Service diagnostic interface for consumer electronics products and networks - Implementation for ech...
IEC 62394:2013 specifies requirements for service diagnostic software to be implemented in products that incorporate a digital interface. It does not specify requirements for carrying out remote diagnosis or for manufacturer-dependent software. It is based upon the ECHONET specification version 2.11, ECHONET Lite specification version 1.01 and APPENDIX Detailed Requirements for ECHONET Device…
Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 2: D...
IEC 62481-2:2013(E) describes DLNA Media Format Profiles applicable to the DLNA Device Classes defined in IEC 62481-1. Media Format Profiles are defined for each of the following media classes: Audio, Image, and AV. In addition, Profile ID values that identify media collections and printer XHTML documents are also introduced. This second edition cancels and replaces the first edition published in…
Standardized product ontology register and transfer by spreadsheets - Part 2: Application guide for ...
IEC 62656-2:2013 provides an application guide for the data parcels specified in IEC 62656-1 and used for the definition of a domain data dictionary that may be imported from and exported to the IEC common data dictionary, or IEC CDD for short, maintained as the IEC 61360-4 database. It provides instructions for the interpretation and use of the technical specification defined in IEC 62656-1…
Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General
IEC 62146-1:2013 is applicable to grading capacitors used on circuit-breakers. Their function is to control the voltage distribution across the individual interrupter units of a multi-break circuit-breaker. Grading capacitors can also be used in parallel to the interrupter unit on single break circuit-breakers to modify the Transient Recovery Voltage (TRV). The grading capacitor is a sub-…
Power systems management and associated information exchange - Interoperability in the long term - P...
IEC 62361-2:2013 documents the quality codes used by existing IEC standards related to supervisory control and data acquisition (SCADA) in the field of power systems management. Meter reading quality coding is not considered to be in the scope of this version of the document. It determines and documents mapping between these standards. Eventual loss of quality information that might occur in…
Process management for avionics - Atmospheric radiation effects - Part 4: Design of high voltage air...
IEC 62396-4:2013(E) provides guidance on atmospheric radiation effects and their management on high voltage (nominally above 200 V) avionics electronics used in aircraft operating at altitudes up to 60 000 ft (18,3 km). This part of IEC 62396 defines the effects of that environment on high voltage electronics and provides design considerations for the accommodation of those effects within…
Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions
IEC 62670-1:2013 defines standard conditions for assessing the power produced by CPV systems and their photovoltaic subcomponents. The object is to define a consistent set of conditions so that power ratings noted on data sheets and nameplates will have a standard basis. Two sets of conditions are included to characterize:
a) operating conditions, and
b) test conditions.
Energy performance of buildings — Assessment of overall energy performance
ISO 16346:2013 defines the general procedures to assess the energy performance of buildings, including technical building systems, and defines the different types of ratings, and the building boundaries.
The purpose of ISO 16346:2013 is to
a) collate results from other International Standards that calculate energy use for specific services within a building,
b) account for energy generated…
Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs...
IEC 60494-2:2013 defines the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead line equipment. It also defines the tests the pantographs have to perform, excluding insulators. This Standard relates to conventional suspended overhead line equipment and accessories. The main technical changes with regard to the previous edition…
