Rechercher

Scope 1.1 This Standard establishes requirements and recommendations for the geological storage of carbon dioxide. The purpose of these requirements is to promote environmentally safe and long-term containment of carbon dioxide in a way that minimizes risks to the environment and human health. is primarily applicable to saline aquifers and depleted hydrocarbon reservoirs and does not preclude…

Scope 1.1 This Standard describes testing procedures and states performance requirements for general service incandescent and tungsten halogen reflector lamps. 1.2 This Standard includes performance requirements for (a) wattage; (b) lamp efficacy; (c) rated luminous flux; (d) centre beam intensity; and (e) rated life. 1.3 This Standard applies to incandescent and tungsten halogen reflector…

Scope 1.1 This Standard covers plumbing supply fittings and accessories located between the supply stop and the terminal fitting, inclusive, as follows: (a) automatic compensating valves for individual wall-mounted showering systems; (b) bath and shower supply fittings; (c) bidet supply fittings; (d) clothes washer supply fittings; (e) drinking fountain supply fittings; (f) humidifier…

1 Scope 1.1 This Standard applies to fans and ventilation equipment that is (a) cord-connected, rated at not more than 250 V; (b) permanently-connected to supply circuits of 600 V and less, single-phase or three-phase; (c) used in non-hazardous locations; (d) used in household, commercial, agricultural, or industrial locations; (e) used indoors or outdoors; and (f) used in accordance with the…

Scope 1.1 This Standard specifies the chassis and body requirements and safety equipment requirements for school buses. Note: The main purpose of this Standard is to provide the safest possible vehicle for students using school buses. It needs to be stressed, however, that standards are not substitutes for thorough, ongoing, and comprehensive safety training of students and drivers. 1.2 This…

1 Scope 1.1* This part of ISO 10524 specifies requirements for manifold pressure regulators (as defined in 3.6) intended to be connected to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and for line pressure regulators (as defined in 3.4) for inlet pressures up to 3 000 kPa and intended for use in pipeline systems for the following medical gases: - oxygen; - nitrous…

ISO/TS 17444-1:2012 defines metrics for the charging performance of electronic fee collection (EFC) systems in terms of the level of errors associated with charging computation. ISO/TS 17444-1:2012 is a toolbox standard of metrics. The detailed choice of metrics depends on the application and the respective context. ISO/TS 17444-1:2012 describes a set of metrics with appropriate definitions,…

ISO 9334:2012 de­fines terms relating to the optical transfer function and indicates, where pertinent, the mathematical relationships between those terms. It also defines important parameters that should be speci­fied in connection with optical transfer function testing. The terms and parameters de­fined in ISO 9334:2012 apply to all measurements of the optical transfer function for optical,…

This part of ISO 16145 specifies a method of protective coatings and its inspection of cargo oil tanks for crude oil tankers of not less than 5 000 tones deadweight, which are contracted for new building on or after 1 January 2013; or in the absence of a building contract, the keels of which are laid or which are at a similar stage of construction on or after 1 July 2013; or the delivery of which…

This part of ISO 18738 specifies requirements and methodology for the measurement and reporting of lift ride quality during lift motion. It does not specify acceptable or unacceptable ride quality. NOTE Lift performance parameters are often referenced in conjunction with lift ride quality. Parameters relevant to lift performance include jerk and acceleration. This part of ISO 18738 defines and…