Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Pa...
ISO 19072-2:2013 defines the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle.
Performance criteria and requirements are also defined for a sealed variant of the pyrotechnic device/initiator harness connector assembly.
Performance criteria and requirements are also…
Software and systems engineering — Reference model for product line engineering and management
ISO/IEC 26550:2013 provides a reference model consisting of an abstract representation of the key processes of software and systems product line engineering and management, and the relationships between the processes.
In the product line there are two development lifecycles (domain engineering and application engineering), the involvement of variabilities, and two process groups (organizational…
Information technology - Real time locating systems (RTLS) - Part 62: High rate pulse repetition fre...
ISO/IEC 24730-62:2013 defines the air-interface for real time locating
systems (RTLS) using a physical layer Ultra Wide Band (UWB) signalling mechanism
(based on IEEE 802.15.4a UWB). This modulation scheme employs high rate pulse
repetition frequencies (PRF) 16 MHz or 64 MHz, and a combination of burst
position modulation (BPM) and binary phase-shift keying (BPSK) giving an
extremely high…
Software and systems engineering - Reference model for product line engineering and management
ISO/IEC 26550:2013 provides a reference model consisting of an abstract representation of the key processes of software and systems product line engineering and management, and the relationships between the processes.
In the product line there are two development lifecycles (domain engineering and application engineering), the involvement of variabilities, and two process groups (organizational…
Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition fre...
ISO/IEC 24730-62:2013 defines the air-interface for real time locating
systems (RTLS) using a physical layer Ultra Wide Band (UWB) signalling mechanism
(based on IEEE 802.15.4a UWB). This modulation scheme employs high rate pulse
repetition frequencies (PRF) 16 MHz or 64 MHz, and a combination of burst
position modulation (BPM) and binary phase-shift keying (BPSK) giving an
extremely high…
Universal serial bus interfaces for data and power - Part 3: USB Battery Charging Specification, Rev...
IEC 62680-3:2013 contains the specifications that define limits as well as detection, control and reporting mechanisms to permit devices to draw current in excess of the USB 2.0 specification for charging and/or powering up from dedicated chargers, hosts, hubs and charging downstream ports. These mechanisms are backward compatible with USB 2.0 compliant hosts and peripherals. The text is based on…
Fire chemistry — Generation and measurement of aerosols
ISO 29904:2013 provides a guide to the generation of aerosol particles in fires, defines apparatus and procedures for the sampling and measurement of aerosols, and provides procedures for the interpretation and reporting of the data. It is intended to assist fire test designers and those making measurements at unwanted fires to choose and use appropriate methods for aerosol measurement for…
Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers
ISO 3691-6:2013 gives safety requirements and the means for their verification for self-propelled carriers designed for carrying burdens without lifting, as defined in ISO 5053, and/or personnel carriers, having three or more wheels, a maximum speed not exceeding 56 km/h and a load capacity not exceeding 5 000 kg.
It is applicable to trucks equipped with a platform (which can be tilting) for the…
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equ...
ISO 14253-1:2013 establishes the rules for determining the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or limits of maximum permissible errors for a metrological characteristic of a measuring equipment, taking into account the measurement uncertainty.
These rules are different for tolerances to individual workpieces and…
Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with ...
IEC 62610-4:2013 specifies the test setup and test parameters for water supplied heat exchangers within single electronic cabinet configurations. The tests are focused on cabinets for the installation of high power dissipation electronic equipment. The cabinets concerned are from the IEC 60297 (19 in) and IEC 60917 (25 mm) series. The purpose of this standard is to provide comparable data for the…
