Specification of permanent wood foundations for housing and small buildings
Scope
1.1
This Standard applies to the selection of materials for, and the fabrication and installation of, preserved wood foundations.
1.2
Specific details are provided for buildings up to three storeys in building height above the foundation and having a building area not exceeding 600 m2.
1.3
This Standard provides for the optional use of wood sleeper, poured concrete slab, and suspended…
Scope
1.1
This Standard applies to single- and multi-conductor Type TECK 90 armoured cable intended for installation in accordance with the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less and having a maximum temperature rating of 90 °C in both dry and wet locations.
1.2
In this Standard, "shall" is used to express a requirement, i.e., a…
Scope
1.1
This Standard applies to photovoltaic connectors:
a) single pole, rated maximum 2000 V dc; and
b) multi-pole, rated maximum 2000 V ac or dc.
1.2
This Standard applies to photovoltaic connectors intended for use in solar photovoltaic systems in accordance with the Canadian Electrical Code, Part I, using stranded copper conductors, for use in either indoor or outdoor nonhazardous…
Scope
1.1
This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear devices such as
a) switches;
b) interrupting devices;
c) air circuit breakers;
d) power circuit breakers; and
e) control, metering, protective, and regulating equipment with associated interconnections and supporting structures.
1.2
This Standard covers equipment with a nominal…
Scope
1.1
This Standard applies to splitters, having a current rating of 5000 A and less, intended for installation in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I on systems having nominal voltages of 600 V and less.
1.2
General requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0.
1.3
In this Standard, "shall" is…
Test method for determining the energy efficiency of battery-charging systems
Scope
1.1
This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or existing dc sources (such as automotive power jacks or USB ports).
1.2
This Standard applies to battery-charging systems that are intended to charge secondary battery…
Scope
1.1 General
This Standard covers seamless pipe, electric-welded pipe (flash-welded pipe and low-frequency electricwelded pipe excluded) and submerged-arc-welded pipe primarily intended for use in oil or gas pipeline systems.
Notes:
1) Flash-welded pipe is pipe manufactured by a process using electric-resistance heating to produce a simultaneous coalescence over the entire area…
A231.1-14 - Precast concrete paving slabs
Scope
1.1
This Standard specifies requirements for concrete paving slabs manufactured from hydraulic cement concrete to be used in the construction of pavement and roof coverings. This Standard includes units with architectural finishes or tactile surfaces.
Note: Annex A contains information on efflorescence and recommends methods for its removal…
Scope
1.1
This Standard describes essential elements and methods in the safe handling, transportation, and biological decontamination of contaminated reusable medical devices and is to be used in conjunction with CSA Z314.0. Where differences exist, the requirements of this Standard apply.
Note: The biological decontamination process includes thorough cleaning and, whenever necessary for…
Standard for packaged terminal air conditioners and heat pumps
1 Scope
1.1
This Standard applies to factory-manufactured residential, commercial, and industrial packaged terminal air-conditioners and heat pumps as defined in Clause 3.
1.2
This Standard applies to electrically operated vapour-compression refrigeration systems.
1.3
Packaged terminal air-conditioners and heat pumps are intended for unducted installation, but may be employed with ductwork…
