Rechercher

IEC 60793-1-52:2014 provides a practical method for evaluating fibre performance in a defined environment. The purpose of this standard is to define a test that determines the suitability of sub-category A1a to A1d multimode fibres and class B and C single-mode fibres to withstand the environmental condition of change in temperature which may occur in actual use, storage and/or transport. The…

IEC 60793-1-53:2014 provides a practical method for evaluating fibre performance in a defined environment. The purpose of this standard is to define a test that determines the suitability of sub-category A1a to A1d multimode fibres and class B and C single-mode fibres to withstand the environmental condition of immersion in distilled or demineralized water which may occur in actual use, storage…

This part of ISO/IEC 19794 specifies data interchange formats for signature/sign behavioural data captured in the form of a multi-dimensional time series using devices such as digitizing tablets or advanced pen systems. The data interchange formats are generic, in that they may be applied and used in a wide range of application areas where handwritten signs or signatures are involved. No…

This part of ISO/IEC 19794 specifies data interchange formats for signature/sign behavioural data captured in the form of a multi-dimensional time series using devices such as digitizing tablets or advanced pen systems. The data interchange formats are generic, in that they may be applied and used in a wide range of application areas where handwritten signs or signatures are involved. No…

ISO 15031-4:2014 specifies a set of standard diagnostic services to be provided by vehicles (OBD services). ISO 15031-4:2014 specifies a complementary set of facilities, to be provided by external test equipment, which will include scan tool facilities. These facilities provide complete, efficient, and safe access to all of the public OBD (on-board diagnosis) services on any vehicle, which is…

ISO 13482:2014 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots: mobile servant robot; physical assistant robot; person carrier robot. These robots typically perform tasks to improve the quality of life of intended users, irrespective of age…

ISO 2351-3:2014 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws, listed in ISO 1703 under reference number 3 2 03 01 0. It applies to bits with male hexagon drive or with cylindrical flat-end drive as defined in ISO 1173 and to tips for screwdrivers as defined in ISO 2936. It also gives recommended combinations between tips and bits.

Scope 1.1 This Standard specifies requirements for the classification and certification of a) carbon steel covered electrodes for shielded metal arc welding (SMAW); b) chromium and chromium-nickel steel covered electrodes for SMAW, including electrodes designated for welding heat-resistant steels containing more than 11% chromium and less than 50% nickel; c) low alloy steel covered…

Scope 1.1 This Standard specifies technical requirements for the design, construction, testing, inspection, and performance of relocatable above-ground collapsible fabric storage tanks (bladders) intended for the storage of petroleum products and allied petroleum products with a relative density not greater than 1. 1.2 This Standard applies to bladders that are shop-fabricated from reinforced…

Scope 1.1 This Standard provides minimum requirements for the application of asphalt shingles on roofs with a slope of 1:6 and steeper. Portions of this Standard may not apply to laminated and/or dimensional shingles. The manufacturers of these shingles should be consulted for specific installation instructions. Note: Annex A is included to provide recommendations for acceptable…