Rechercher

1.1 General This Standard specifies special requirements for the durability aspects of the design and construction of new parking structures and parts of buildings subject to vehicular traffic. This includes pedestrian traffic areas adjoining to or contained within parking structures. These include areas such as stairs, and pedestrian bridges from parking structures. 1.2 Structure types…

Scope 1.1 This Standard covers portable and floor care home appliances intended for household use, including (a) air treatment appliances; (b) food and beverage preparation appliances; (c) counter top cooking appliances; (d) personal care appliances; (e) garment care appliances; and (f) floor care appliances. See Annex B for a list of portable and floor care home appliances under these…

1 Scope 1.1 This Standard specifies test procedures and performance requirements for the efficacy of fluorescent lamp ballasts for use in fluorescent luminaires to be installed in industrial, commercial, or residential locations. 1.2 This Standard applies to ballasts intended to operate at a line frequency of 60 Hz. 1.3 This Standard covers ballasts for the types of fluorescent lamp specified in…

1.1 The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform lifts and stairway chairlifts): (a) motor controllers; (b) motion controllers; (c) operation controllers; (d) operating devices; and (e) all other electrical equipment…

1.1 This Standard applies to compact and household refrigerators, refrigerator-freezers, freezers, wine chillers, and hybrid wine chillers that are electrically operated on a 60 Hz alternating current with a nominal supply voltage of 115 V. 1.2 This Standard applies to (a) refrigerators and refrigerator-freezers with a maximum capacity of 1100 L (39 ft3); (b) freezers with a maximum capacity of…

1.1€€ This Standard establishes the testing procedure for determining efficiencies under varying loads and speeds for three-phase output variable frequency drives (VFDs) with rated voltage up to 750 V. This test procedure is limited to a combination of one motor with one drive. This Standard applies to voltage source inverter (VSI) pulse-width modulated (PWM) drives for squirrel-cage induction…

1 Scope 1.1 This Standard applies to newly produced non-metallic dip tubes intended for use in water heaters. 1.2 Compliance of a dip tube with this Standard does not imply that such dip tube is acceptable for use in water heaters without supplemental tests with the dip tube installed in the particular water heater design. 1.3 This standard contains SI (Metric) corresponding to the yard/pound…

Scope 1.1 This Standard applies to the decommissioning of licensed facilities and other locations where nuclear substances are managed, possessed, or stored. Notes: (1) Users are responsible for determining the extent to which this Standard applies to a given facility or location and for consulting the associated regulatory requirements. (2) Annexes E, F, and G contain recommended…

ISO 9869-1:2014 describes the heat flow meter method for the measurement of the thermal transmission properties of plane building components, primarily consisting of opaque layers perpendicular to the heat flow and having no significant lateral heat flow. The properties which can be measured are: a) the thermal resistance, R, and thermal conductance, Λ, from surface to surface; b) the total…

ISO/IEC 27036-2:2014 specifies fundamental information security requirements for defining, implementing, operating, monitoring, reviewing, maintaining and improving supplier and acquirer relationships. These requirements cover any procurement and supply of products and services, such as manufacturing or assembly, business process procurement, software and hardware components, knowledge process…