Identification cards - Optical memory cards - Linear recording method - Part 5: Data format for info...
ISO/IEC 11694-5:2014 defines the data format for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method.
Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrica...
IEC 60794-4-10:2014 which is a family specification, covers cable construction, test methods and optical, mechanical, environmental and electrical performance requirements for OPGW (optical ground wire) which is used for the protection of electrical power lines against atmospheric discharges or short-circuits and, at the same time, as a high bandwidth transport media for communications-and-…
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
IEC 62734:2014 provides specifications in accordance with the OSI Basic Reference Model, ISO/IEC 7498-1, (e.g., PhL, DL, etc.). It is intended to provide reliable and secure wireless operation for non-critical monitoring, alerting, supervisory control, open loop control, and closed loop control applications. It defines a protocol suite, including system management, gateway considerations, and…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: ...
IEC 60684-3-284:2014 gives the requirements for heat-shrinkable sleevings for oil barrier, medium voltage cable jointing and termination applications, with nominal shrink ratios of up to 3:1. These sleevings have been found suitable for use up to temperatures of 80 °C. Included are Type A: polyolefin based and Type B: fluoropolymer based, enhanced oil resistance. These sleevings are normally…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: ...
IEC 60684-3-284:2014 gives the requirements for heat-shrinkable sleevings for oil barrier, medium voltage cable jointing and termination applications, with nominal shrink ratios of up to 3:1. These sleevings have been found suitable for use up to temperatures of 80 °C. Included are Type A: polyolefin based and Type B: fluoropolymer based, enhanced oil resistance. These sleevings are normally…
Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protoco...
ISO 10161-2:2014 defines the protocol implementation conformance statement (PICS) proforma for the ILL protocol as specified in ISO 10161‑1, in compliance with the relevant requirements, and in accordance with the relevant guidance for a PICS proforma, given in ISO/IEC 9646‑2.
Implementers claiming conformance to ISO 10161‑1 complete the proforma as part of the conformance requirements.
Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental...
ISO 14594:2014 gives the general guidelines for the determination of experimental parameters relating to the primary beam, the wavelength spectrometer, and the sample that need to be taken into account when carrying out electron probe microanalysis. It also defines procedures for the determination of beam current, current density, dead time, wavelength resolution, background, analysis area,…
Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surfac...
IEC 60115-8-1:2014 is applicable to the drafting of detail specifications for fixed surface mount (SMD) low-power film resistors in rectangular chip shape (styles RR) or in cylindrical MELF shape (styles RC) classified to level G, which is defined in IEC 60115-8:2009, 1.5 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major…
