Performance and assessment requirements for design standards on structural concrete
ISO 19338:2014 provides performance and assessment requirements for design standards of structural concrete. It can be used for international harmonization of design and construction requirements.
ISO 19338:2014 includes requirements, which define the required structural concrete performance; criteria, which give means for expressing the requirements; and assessment clauses, which give acceptable…
Building construction machinery and equipment — Concrete mixers — Part 2: Procedure for examination ...
ISO 18650-2:2014 specifies the procedure and requirements for examination of the mixing efficiency of batch-type and continuous-type concrete mixers as defined in ISO 18650-1. It is applicable to concrete mixers having a rated capacity greater than or equal to 70/50.
Earth-moving machinery and rough-terrain variable-reach trucks — Design requirements for machines in...
ISO 17253:2014 specifies the requirements for seated-operator, ride-on, earth-moving machinery, as defined in ISO 6165, and rough-terrain variable-reach trucks, as defined in ISO 10896‑1, intended to be driven on public roads. It specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations, and hazardous events when these…
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts ...
ISO/TS 21219-2:2014 specifies rules for the creation and extending of TPEG application UML models. The rules are intended to ensure that TPEG application UML models can be interpreted unambiguously for conversion to physical format representations. TPEG application UML models that are defined according to these rules may be used for automatic generation of TPEG standards and for automatic…
Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated saf...
ISO 11485-3:2014 defines the conditions to classify a curved glass product as a curved safety glass.
It classifies curved tempered glass and curved laminated glass as safety glasses used in buildings, by performance under impact and by mode of breakage. The classification by drop height corresponds to graded values of energy transmitted by the impact of a person.
The classification system in ISO…
Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
IEC 60793-1-50:2014 provides a practical method for evaluating fibre performance in a defined environment. The purpose of this standard is to determine the suitability of optical fibre sub-category A1a to A1d multimode fibres and class B and C single-mode fibres to withstand the environmental condition of high humidity and high temperature which may occur in actual use, storage and/or transport.…
Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of a...
IEC TR 61641:2014 gives guidance on the method of testing of ASSEMBLIES under conditions of arcing in air due to an internal fault. The purpose of this test is to assess the ability of the ASSEMBLY to limit the risk of personal injury, damage of ASSEMBLIES and its suitability for further service as a result of an internal arcing fault. This third edition cancels and replaces the second edition…
Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
IEC 62353:2014 applies to testing of medical electrical equipment and medical electrical systems, hereafter referred to as ME equipment and ME systems, or parts of such equipment or systems, which comply with IEC 60601-1:1988 (second edition) and its amendments and IEC 60601-1:2005 (third edition) and its amendments, before putting into service, during maintenance, inspection, servicing and after…
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-2-75:2014 provides three standardized and coordinated test methods for determining the ability of a specimen to withstand specified severities of impact. It is used, in particular, to demonstrate an acceptable level of robustness when assessing the safety of a product and is primarily intended for the testing of electrotechnical items. It consists of the application to the specimen of a…
IEC 61754-7-1:2014(E) defines the standard interface dimensions for type MPO family of connectors with one row of fibres. This first edition of IEC 61754-7-1, along with the first edition of IEC 61754-7-2, cancels and replaces the third edition of IEC 61754-7, published in 2008. This first edition of IEC 61754-7-1 includes the one fibre row MPO variants, including the addition of active device…
