Information technology - Abstract Syntax Notation One (ASN.1): Constraint specification - Part 3:
ISO/IEC 8824-3:2015 is part of Abstract Syntax Notation One (ASN.1) and provides notation for specifying user-defined constraints, table constraints, and contents constraints.
Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids ...
ISO 4263-3:2015 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDU, HEES, HEPG and HETG as defined, for example, in ISO 12922[1] and ISO 15380[2]. The ageing is accelerated by the presence of oxygen and metal catalysts at elevated temperature, and the degradation of the fluid is followed by changes in acid number. Other parts of ISO…
ISO 19262:2015 defines terms used in the area of imaging system capability qualification for archival recording and approval.
Only terms related to this area are included. These terms are relevant to the current tasks or are of general interest in imaging system capability qualification for archival recording and approval.
Identification cards — ICC-managed devices — Part 2: Physical characteristics and test methods for c...
ISO/IEC 18328-2:2015 defines physical characteristics and test methods for cards with devices, including but not limited to power supplying devices, displays, sensors, microphones, loudspeakers, buttons or keypads. This part of ISO/IEC 18328 also covers aspects of coexistence of technologies of devices on the card and other machine readable card technologies.
Additional requirements related to…
Rough-terrain trucks — Safety requirements and verification — Part 4: Additional requirements for va...
ISO 10896-4:2015 specifies the additional safety requirements and means of verification for rough-terrain variable-reach trucks (hereafter referred to as trucks) fitted with a lifting attachment for handling suspended loads which can swing freely in one or more directions. It is applicable to trucks covered by ISO 10896‑1 and ISO 10896‑2.
ISO 10896-4:2015 does not apply to:
the lifting of…
Identification cards - ICC-managed devices - Part 2: Physical characteristics and test methods for c...
ISO/IEC 18328-2:2015 defines physical characteristics and test methods for cards with devices, including but not limited to power supplying devices, displays, sensors, microphones, loudspeakers, buttons or keypads. This part of ISO/IEC 18328 also covers aspects of coexistence of technologies of devices on the card and other machine readable card technologies.
Additional requirements related to…
Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fittin...
ISO 19830:2015 Standard is to define how peak fitting and the results of peak fitting in X-ray photoelectron spectroscopy shall be reported. It is applicable to the fitting of a single spectrum or to a set of related spectra, as might be acquired, for example, during a depth profile measurement. This International Standard provides a list of those parameters which shall be reported if either…
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based f...
ISO 4079:2015 specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from…
IEC 61754-6-100:2015 defines the standard interface dimensions of simplified receptacle dimensions for the type MU connector family. The receptacle assembly consists of a simplified receptacle housing and a simplified plug. Keywords: interface dimensions for the type MU connector
