Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrai...
ISO 10896-5:2015 defines design and safety requirements, and means for their verification, for the interface between a non-slewing or slewing variable-reach rough-terrain truck (hereafter referred to as "trucks") and an integrated personnel work platform (hereafter referred to as "integrated PWP").
ISO 10896-5:2015 does not address the design or safety requirements related to…
Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by par...
ISO 14644-1:2015 specifies the classification of air cleanliness in terms of concentration of airborne particles in cleanrooms and clean zones; and separative devices as defined in ISO 14644‑7.
Only particle populations having cumulative distributions based on threshold (lower limit) particle sizes ranging from 0,1 µm to 5 µm are considered for classification purposes.
The use of light scattering…
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measure...
ISO/TS 14837-32:2015 provides guidance and defines methods for the measurement of dynamic properties of the ground through which ground-borne noise and vibration is transmitted, from the operation of rail systems and into foundations of neighbouring buildings. The purpose is to determine the parameters of the ground system which are necessary to reliably predict the noise and vibration…
Cable networks for television signals, sound signals and interactive services - Part 5: Headend equi...
IEC 60728-5:2015 specifies the characteristics of equipment used in the headends of terrestrial broadcast and satellite receiving systems (without satellite outdoor units and without those broadband amplifiers in the headend as described in IEC 60728-3). It:
- covers the frequency range 5 MHz to 3 000 MHz;
- identifies performance requirements for certain parameters;
- lays down data…
Glass in building — Pendulum impact testing and classification of safety glass
The purpose of ISO 29584:2015 is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact.
ISO 29584:2015 examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves…
Guidance for gamma spectrometry measurement of radioactive waste
ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste.
Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following:
- raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning;
- conditioned waste in various forms and…
Rough-terrain trucks — Non-integrated personnel work platforms — Part 1: Design, safety requirements...
ISO 18479-1:2015 defines design criteria and safety requirements for non-integrated personnel work platforms (PWPs) which, if approved for use on the rough-terrain truck, can be fitted and secured to the forks, carriage or attachment bracket of a rough-terrain truck to elevate occupants with or without materials and tools to raised work positions without any controls in the platform to control…
Health informatics — Categorial structures for representation of acupuncture — Part 2: Needling
The purpose of ISO/TS 16843-2:2015 is to specify categorial structures within the subject field of acupuncture by defining a set of domain constraints for use within terminological resources.
This Technical Specification describes a concept system detailing domain constraints of sanctioned characteristics, each composed of a semantic link and an applicable characterizing category.
The potential…
Information technology — Security techniques — Refining software vulnerability analysis under ISO/IE...
ISO/IEC TR 20004:2015 refines the AVA_VAN assurance family activities defined in ISO/IEC 18045 and provides more specific guidance on the identification, selection and assessment of relevant potential vulnerabilities in order to conduct an ISO/IEC 15408 evaluation of a software target of evaluation. This Technical Report leverages publicly available information security resources to support the…
Information technology - Security techniques - Refining software vulnerability analysis under ISO/IE...
ISO/IEC TR 20004:2015 refines the AVA_VAN assurance family activities defined in ISO/IEC 18045 and provides more specific guidance on the identification, selection and assessment of relevant potential vulnerabilities in order to conduct an ISO/IEC 15408 evaluation of a software target of evaluation. This Technical Report leverages publicly available information security resources to support the…
