Wet storage of irradiated fuel and other radioactive materials
1.1
This Standard specifies requirements for the wet storage of irradiated fuel and other radioactive
materials requiring shielding or decay heat dissipation.
1.2
This Standard addresses the
a) design;
b) construction and commissioning;
c) operation; and
d) management
of the wet storage system:
Notes:
1) Design includes site selection.
2) Decommissioning is addressed in CSA N294.
1.3…
General requirements for nuclear emergency management programs
1.1
This Standard establishes criteria for the emergency management programs of on- and off-site organizations to address nuclear emergencies at Canadian reactor facilities.
Notes:
1)
This Standard may provide guidance for nuclear facilities other than reactor facilities. The operators of these facilities may, together with the AHJs, determine the applicability and suitability of the guidance…
1.1
This Standard provides requirements and guidance regarding beyond design basis accidents (BDBAs) at existing and new water-cooled reactor facilities with the fundamental objective of protecting the public and environment from the harmful effects of ionizing radiation. This includes
a)
determination of the functional DEC requirements for the structures, systems, and components (SSCs) that…
Requirements for the containment system of nuclear power plants
1.1
This Standard applies to the containment system of existing and new water-cooled nuclear power
plants.
Notes:
1) “Existing nuclear power plants” refers to those licensed for initial operation prior to 2011.
2) The requirements for new builds and existing plants might differ. Where requirements differ for new builds
and existing plants, the difference is explicitly stated.
1.2
This…
Mechanical couplings for drain, waste,and vent pipe and sewer pipe
1.1
This Standard covers mechanical couplings that are used to axially join pipes and fittings in non-pressure
drain, waste, and vent (DWV) piping systems and sewer piping systems located inside or outside
buildings and above ground or underground.
Notes:
1) Caution should be exercised when installing mechanical couplings and elastomeric end caps at low
temperatures. The coupling or…
1 Scope
This Standard provides rules and requirements for the design, fabrication, erection, inspection, testing,
maintenance, and use of falsework and formwork materials, components, and systems where they are
erected to provide temporary vertical and lateral support or containment of freshly placed concrete for
buildings and other structures during their construction, alteration, or repair…
1.1
This Standard specifies requirements for sustainable forest management (SFM) of a defined forest area
(DFA), including requirements for
a) the management framework;
b) commitment;
c) public participation;
d) performance measures and targets;
e) the systematic review of actions;
f) the monitoring of effectiveness; and
g) continual improvement.
Note: While this Standard provides…
Asphalt shingles made from glass felt and surfaced with mineral granules
1.1
This Standard covers asphalt roofing shingles composed of impregnated glass felt, coated on both sides
with asphaltic material and surfaced on the weather side with mineral granules. This Standard is
designed for the evaluation of products as they are manufactured or as agreed upon between the
purchaser/user and the manufacturer/supplier.
1.2
This Standard covers shingles that are
a)…
1.1
This Standard specifies requirements related to the performance, design, testing, labelling, and
provision of instructions for manufactured single-span horizontal lifeline systems (HLL systems) (see
Figure 1). These HLL systems are a component of a complete system for fall arrest.
1.2
This Standard does not apply to
a) HLL systems
i) with span lengths greater than 18.3 m (60 ft);
ii)…
Selection and use of active fall-protection equipment and systems
1.1
This Standard specifies requirements for the selection, use, and application of active fall-protection equipment and systems.
1.2
The purpose of this Standard is to provide criteria and considerations for the safe selection and use of active fall-protection equipment and systems.
1.3
The selection and use of fall-protection systems as part of a fall-protection program that may include…