Information technology - Ubiquitous green community control network - Security
ISO/IEC/IEEE 18883:2016 is a specification which provides security service enhancements for the protocol defined in IEEE Std 1888™1, IEEE Standard for Ubiquitous Green Community Control Network Protocol. This standard describes security requirements for the ubiquitous green community control network and specifies the system security architecture along with security procedures and…
Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, ...
IEC TS 62668-1:2016(E) defines requirements for avoiding the use of counterfeit, recycled and fraudulent components used in the aerospace, defence and high performance (ADHP) industries. It also defines requirements for ADHP industries to maintain their intellectual property (IP) for all of their products and services. The risks associated with purchasing components outside of franchised…
Information technology — Process assessment — Application of conformity assessment methodology to th...
ISO/IEC 29169:2016 aims to define the application of a conformity assessment methodology, based on the existing published ISO/IEC standards and guides, to the process assessment of process quality characteristics and organizational process maturity, performed in accordance with the requirements of the ISO/IEC 33001 to ISO/IEC 33099 family of process assessment standards,
Conformity assessment,…
Information technology - Process assessment - Application of conformity assessment methodology to th...
ISO/IEC 29169:2016 aims to define the application of a conformity assessment methodology, based on the existing published ISO/IEC standards and guides, to the process assessment of process quality characteristics and organizational process maturity, performed in accordance with the requirements of the ISO/IEC 33001 to ISO/IEC 33099 family of process assessment standards,
Conformity assessment,…
Soil quality — Screening soils for isopropanol-extractable organic compounds by determining emulsifi...
ISO 17183:2016 specifies the procedure to screen highly contaminated soils to detect organic compounds extractable with isopropanol, including a wide range of fuels, oils, and greases. The method is useful for finding hot spots. It is applicable both in laboratories and for site screening in the field. The working range is approximately 0,01 to 0,3 in absorbance units, corresponding to…
Earth-moving machinery — Backhoe loaders — Terminology and commercial specifications
ISO 8812:2016 establishes terminology and the content of commercial literature specifications for self-propelled crawler or wheeled backhoe loaders, as defined in ISO 6165, and their equipment.
ISO 8812:2016 is not applicable to loaders equipped with a backhoe attachment in accordance with ISO 7131:2009, 3.3.1.1.
Road vehicles — Pedestrian protection — Head impact test method
ISO 14513:2016 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5 t (GVM), as defined in ISO 3833. The impact device to be used in this test method will be robust for a vehicle impact velocity of up to 11 m/s. The test method specified addresses the reduction of an adult pedestrian head injury…
Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements
ISO 10924-1:2016 defines terms and specifies general test requirements for circuit breakers for use in road vehicles with a nominal voltage of 12 V d.c., 24 V d.c, 48 V d.c. and 450 V d.c.
ISO 10924-1:2016 is intended to be used in conjunction with other parts of ISO 10924. The numbering of its clauses corresponds to that of this part of ISO 10924 whose requirements are applicable, except where…
Intelligent transport systems — Automatic vehicle and equipment identification — Electronic registra...
ISO 24534-3:2016 provides the requirements for an electronic registration identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for the following:
- electronic identification of local and foreign vehicles by national authorities;
- vehicle manufacturing, in-life-maintenance, and end-of-life…
Monitoring and energy performance measurements of compressed air systems
1.1 Inclusions
This Standard is intended to be used for compressed air systems with the following characteristics:
a) electrically driven three-phase air compressors equal to or greater than 5 horsepower;
b) positive displacement stationary air compressors and associated equipment;
c) operating pressures between 2.5 and 17 bar(g) (36 and 250 psi(g)); and
d) industrial and commercial…