Ships and marine technology — Offshore wind energy — Supply chain information flow
ISO 29404:2015 specifies content and format of the messages initiating and controlling the physical movement of wind turbine generator (WTG) components from suppliers to the construction site during the construction phase as well as for repair and maintenance purposes.
ISO 29404:2015 is applicable to all organizations involved in the production, transportation, storage and installation of WTG…
Information and documentation — Romanization of Chinese
ISO 7098:2015 explains the principles of the Romanization of Modern Chinese Putonghua (Mandarin Chinese), the official language of the People's Republic of China as defined in the Directives for the Promotion of Putonghua, promulgated on 1956-02-06 by the State Council of China. This International Standard can be applied in documentation of bibliographies, catalogues, indices, toponymic…
ISO 17828:2015 defines a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all pourable solid biofuels with a nominal top size of maximum 100 mm.
Bulk density is not an absolute value; therefore, conditions for its determination have to be standardized in order to gain comparative measuring results.
NOTE Bulk…
Cable networks for television signals, sound signals and interactive services - Part 5: Headend equi...
IEC 60728-5:2015 specifies the characteristics of equipment used in the headends of terrestrial broadcast and satellite receiving systems (without satellite outdoor units and without those broadband amplifiers in the headend as described in IEC 60728-3). It:
- covers the frequency range 5 MHz to 3 000 MHz;
- identifies performance requirements for certain parameters;
- lays down data…
Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 19449:2015 specifies methods for the direct measurement of the concentration of gaseous exhaust emissions from mopeds as defined in ISO 3833 during inspection or maintenance. The results measured by this International Standard show the concentration of gaseous exhaust emissions in the no-load engine operating condition. It is applicable to mopeds having spark ignition engines (four-stroke…
ISO 19160-1:2015 defines a conceptual model for address information (address model), together with the terms and definitions that describe the concepts in the model. Lifecycle, metadata, and address aliases are included in the conceptual model. The model is presented in the Unified Modeling Language (UML).
The model provides a common representation of address information, independent of actual…
Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrai...
ISO 10896-5:2015 defines design and safety requirements, and means for their verification, for the interface between a non-slewing or slewing variable-reach rough-terrain truck (hereafter referred to as "trucks") and an integrated personnel work platform (hereafter referred to as "integrated PWP").
ISO 10896-5:2015 does not address the design or safety requirements related to…
Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by par...
ISO 14644-1:2015 specifies the classification of air cleanliness in terms of concentration of airborne particles in cleanrooms and clean zones; and separative devices as defined in ISO 14644‑7.
Only particle populations having cumulative distributions based on threshold (lower limit) particle sizes ranging from 0,1 µm to 5 µm are considered for classification purposes.
The use of light scattering…
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measure...
ISO/TS 14837-32:2015 provides guidance and defines methods for the measurement of dynamic properties of the ground through which ground-borne noise and vibration is transmitted, from the operation of rail systems and into foundations of neighbouring buildings. The purpose is to determine the parameters of the ground system which are necessary to reliably predict the noise and vibration…
Glass in building — Pendulum impact testing and classification of safety glass
The purpose of ISO 29584:2015 is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact.
ISO 29584:2015 examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves…
