Rechercher

ISO/IEC 30116:2016 - specifies the methodology for the measurement of specific attributes of OCR-B character strings, - defines a method for evaluating these measurements and deriving an overall assessment of character string quality, - defines a reference decode algorithm for OCR-B, and - gives information on possible causes of deviation from optimum grades to assist users in…

ISO 19364:2016 specifies a method for comparing computer simulation results from a vehicle mathematical model to measured test data for an existing vehicle according to steady-state circular driving tests as specified in ISO 4138 or the Slowly Increasing Steer Test that is an alternative to ISO 4138. The comparison is made for the purpose of validating the simulation tool for this type of test…

ISO 17488:2016 provides a detection-response task mainly intended for assessing the attentional effects of cognitive load on attention for secondary tasks involving interaction with visual-manual, voice-based or haptic interfaces. Although this document focuses on the assessment of attentional effects of cognitive load (see Annex A), other effects of secondary task load may be captured by…

ISO/IEC 30116:2016 - specifies the methodology for the measurement of specific attributes of OCR-B character strings, - defines a method for evaluating these measurements and deriving an overall assessment of character string quality, - defines a reference decode algorithm for OCR-B, and - gives information on possible causes of deviation from optimum grades to assist users in…

IEC 63002:20016 defines interoperability guidelines for external power supplies used with portable computing devices that implement the IEC 62680-1-2: Universal Serial Bus Power Delivery Specification with the IEC 62680-1-3: Universal Serial Bus Interfaces for data and power-Common Components- Type-CTM Type-C Cable and Connector Specification. It specifies the data objects used by a portable…

IEC TS 61724-2:2016(E) defines a procedure for measuring and analyzing the power production of a specific photovoltaic system with the goal of evaluating the quality of the PV system performance. The test is intended to be applied during a relatively short time period (a few relatively sunny days). The intent of this document is to specify a framework procedure for comparing the measured power…

1.1 This Code sets out the minimum provisions for the installation, extension, alteration, and renewal of hydronic heating systems. 1.2 This Code applies to open and closed hydronic heating systems. These systems include a) hydronic space heating; b) radiant heating (wall, floor, ceiling); c) convectors; d) fan coils; e) combination potable water heating and space heating (combo) systems…

1.1 General This Standard applies to the protection of workers from the hazards arising from the use of mobile or stationary machinery. It provides the criteria to be observed and the description, selection, and application of guards and protective devices. Where a current CSA Standard exists for a specific type of machinery (e.g., CSA B167, CAN/CSA-B354.2, CSA M424.1, CSA Z142, CAN/CSA-Z248,…

This International Standard defines a method of determining bulk density of solid biofuels by the use of a standard measuring container. This method is applicable to all pourable solid biofuels with a nominal top size of maximum 100 mm. Bulk density is not an absolute value; therefore, conditions for its determination have to be standardized in order to gain comparative measuring results. NOTE…

This part of ISO 17831 defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation.