Sustainability standard for household room air conditioning appliances
1.1
This Standard covers room air conditioning appliances for households included within the scope of the U.S. Department of Energy (DoE) and Natural Resources Canada (NRCan) minimum energy performance requirements. This includes the following product category: room air conditioner (see Clause 3 for a definition of room air conditioner).
The room air conditioners covered by this Standard…
Establishing and implementing action levels for releases to the environment from nuclear facilities
1.1 Facilities
1.1.1 Types of facilities
1.1.1.1
This Standard addresses the establishment and implementation of ALs for Class I nuclear facilities and uranium mines and mills.
Notes:
1)
In this Standard, any type of Class I nuclear facility or uranium mine and mill is included in the term “nuclear facilities”.
2)
Conventional waste management facilities (e.g., landfills, incinerators,…
Performance requirements for automatic compensating valves for individual showers and tub/shower com...
1.1
This Standard applies to automatic compensating valves intended to be installed at the point of use, where the user has access to flow or final temperature controls, and where no further mixing occurs downstream of the device.
Note: In this Standard, automatic compensating valves are also referred to as devices.
1.2
This Standard covers automatic compensating valves intended to control…
Surge protective devices — Type 1 — Permanently connected
1.1
This Standard applies to surge protective devices (SPDs) intended for:
a)
permanently connected applications designed for limiting surge voltages and discharging surge currents;
b)
use on 50/60 Hz circuits over 42 V and up to 750 V ac;
c)
installation between the secondary of the service transformer and the line side of the service equipment overcurrent protective device. These devices…
Surge protective devices — Type 2 — Permanently connected
1.1
This Standard applies to surge protective devices (SPDs) intended for
a)
permanently connected applications designed for limiting surge voltages and discharging surge currents;
b)
use on 50/60 Hz circuits over 42 V and up to 750 V ac;
c)
installation on the load side of the main overcurrent protective device; and
d)
indoor or outdoor use in accordance with the Canadian Electrical Code, Part I…
Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework,...
This part of IEC 61511 gives requirements for the specification, design, installation, operation
and maintenance of a safety instrumented system (SIS), so that it can be confidently
entrusted to achieve or maintain a safe state of the process. IEC 61511-1 has been
developed as a process sector implementation of IEC 61508:2010.
In particular, IEC 61511-1:
a) specifies the requirements for…
1.1 Facilities and workplaces impacted
This Standard identifies the requirements for a PSM system for facilities and worksites handling or storing materials that are potentially hazardous, either due to an inherent chemical, biological, toxicological, or physical property of those materials, or due to the material’s potential or kinetic energy
1.2 Minimum lifecycle requirements
This Standard…
Information technology — Small computer system interface (SCSI) — Part 323: SCSI Block commands — 3 ...
ISO/IEC 14776-323:2017, defines the model and command set extensions to be used in conjunction with the SCSI Primary Command Set standard - 4 (SPC-4) to facilitate operation of SCSI direct-access block devices (e.g. hard disk drives).
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
ISO 6405-1:2017 standardizes symbols for use on operator controls and other displays applicable to multiple types of earth-moving machinery as defined in ISO 6165.
NOTE 1 ISO 6405‑2 covers symbols for specific types of earth-moving machines, equipment, and accessories.
NOTE 2 ISO 7000 and IEC 60417 can be consulted for additional internationally standardized symbols of potential…
Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Symbols for spec...
ISO 6405-2:2017 standardizes symbols for use on operator controls and other displays on specific types of earth-moving machinery as defined in ISO 6165.
NOTE 1 ISO 6405‑1 covers common symbols that apply to multiple types of earth-moving machinery.
NOTE 2 ISO 7000 and IEC 60417 can be consulted for additional internationally standardized symbols of potential relevance to earth-moving…
