Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-2-9: 2017 defines a test method to reveal mechanical weakness and/or degradation of fibre optic devices when subjected to repetitive or non-repetitive mechanical shocks. It simulates infrequent repetitive or non-repetitive shocks likely to be encountered in normal service or during transportation. This third edition cancels and replaces the second edition published in 2010. This edition…
Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary
ISO 7112:2017 defines terms relating to portable hand-held brush-cutters and grass-trimmers, their cutting attachments and power sources.
The brush-cutter position is shown in Annex A.
Timber structures — Determination of characteristic values — Part 4: Engineered wood products
ISO 12122-4:2017 gives methods of determination of characteristic values for a defined population of engineered wood products calculated from test values.
This document presents methods for the determination of
a) characteristic value of material properties, where the determined property is multiplied by a geometric parameter to give a component capacity or component stiffness, or
b)…
Awnings for leisure accommodation vehicles — Requirements and test methods
ISO 8936:2017 specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck.
ISO 8936:2017 is not applicable to:
a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow;
NOTE 1…
ISO 25237:2017 contains principles and requirements for privacy protection using pseudonymization services for the protection of personal health information. This document is applicable to organizations who wish to undertake pseudonymization processes for themselves or to organizations who make a claim of trustworthiness for operations engaged in pseudonymization services.
ISO 25237:2017
-…
Solid biofuels — Particle size distribution of disintegrated pellets
This International Standard aims to define the requirements and method used to determine particle
size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.
1.1
This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general requirements for materials, manufactured pipe and fittings, relevant test methods, and marking requirements.
Note: The terms “pipe” and “piping”, as well as “tube” and “tubing”, are used interchangeably in the CSA B137 Series.
1.2
This Standard is…
1.1
This Standard applies to newly produced vented gas-fired space heating appliances (see Clause 3,
Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and
materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W).
These appliances are for use with:
a) natural gas;
b) manufactured gas;
c) mixed gas;
d) propane gas […
1.1 General
This Standard specifies requirements for the performance, design, testing, marking, and instructions of personal energy absorbers and lanyards, including lineman’s pole straps and integrally connected lanyards and energy absorbers.
1.2 Applications
Energy absorbers and lanyards are used as parts of complete fall arrest, travel restraint, fall restrict, or work positioning systems,…
Infection control during construction, renovation, and maintenance of health care facilities
1.1
This Standard specifies precautionary and remedial measures, including quality system requirements, for preventing exposure to agents released or augmented because of actions undertaken during health care facility construction, renovation, maintenance, and repair work.
1.2
This Standard is intended to apply to the activities of the following individuals or groups in relation to any aspect…
