Rechercher

IEC 62827-2:2017, defines a wireless power management protocol for wireless power transfer to multiple devices in a wireless power management system. Various functions of wireless power management systems are justified. The wireless power management frames and messages that work between the management block of a power source and the management block or the coupler block of a device, or the…

ISO 377:2017 specifies requirements for the identification, location and preparation of samples and test pieces intended for mechanical tests on steel sections, bars, rod, flat products and tubular products as defined in ISO 6929. If agreed in the order, ISO 377:2017 can also apply to other metallic products. These samples and test pieces are for use in tests that are carried out in conformity…

IEC TS 62446-3:2017(E) defines outdoor thermographic (infrared) inspection of PV modules and plants in operation. This inspection supports the preventive maintenance for fire protection, the availability of the system for power production, and the inspection of the quality of the PV modules. This document lays down requirements for the measurement equipment, ambient conditions, inspection…

IEC TR 62453-51‑20:2017(E) provides information for integrating the CIP™ technology into the COM-based implementation of FDT interface specification (IEC TR 62453-41). The Communication Profile Family 2 (commonly known as CIP™ defines communication profiles based on IEC 61158‑2 Type 2, IEC 61158‑3‑2, IEC 61158‑4‑2, IEC 61158‑5‑2, and IEC 61158‑6‑2, IEC 62026‑3. The basic profiles CP 2/1 (…

ISO/TS 21219-22:2017 specifies the logical data format of OpenLRTM location references and general requirements of the method in Clause 6 and defines the structure of the TPEG toolkit for OpenLR location referencing (OLR) in Clauses 7, 8 and 9. The toolkit is intended to be used in the TPEG location referencing container (TPEG-LRC). OpenLR? has been designed for the use case of transferring…

ISO/TS 7240-29:2017 specifies requirements, test methods and performance criteria for video fire detectors (VFD), which operate in the visible spectrum, for use in fire detection and alarm systems installed in and around buildings (see ISO 7240‑1). For the testing of other types of VFD working on different principles, ISO/TS 7240-29:2017 can be used only for guidance. Detectors developed for the…

ISO/TS 21219-7:2017 establishes the method of signalling the specific location referencing used by all TPEG2 applications that require detailed location information to be delivered to client devices such as TPEG2-TEC. The TPEG2-location referencing container (TPEG2-LRC) is described and shows how it is used to signal which specific location referencing method is in use for a particular TPEG…

ISO/TS 20656-1:2017 describes how partial factors for buried GRP pipes are developed, and are primarily intended to define the necessary safety measures for GRP pipes that meet the requirements of ISO 10639, ISO 10467 and ISO 25780, and EN 1796 and EN 14364. The same methodology can be utilised for other pipe product standards, although other parameters would apply.

ISO 18192-3:2017 defines a test procedure to simulate and evaluate lumbar spinal disc prostheses wear under adverse impingement conditions.

ISO 2878:2017 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 × 108 Ω and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material. NOTE…