Rechercher

ISO 294-5:2017 specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm and a minimum size of 80 mm × ≥90 mm and with a preferred thickness of 2 mm for single-point and multi-point data acquisition. It has been found to provide the maximum anisotropic properties, with only a slight sensitivity to the rate of injection.…

ISO 14955-1:2017 constitutes the application of eco-design standards to machine tools, mainly for automatically operated and/or numerically controlled (NC) machine tools. ISO 14955-1:2017 addresses the energy efficiency of machine tools during the use stage, i.e. the working life of the machine tool. Environmentally relevant stages other than the use stage and relevant impacts other than energy…

IEC/PAS 63131:2017(E) defines a set of operational control functions (objects) and the associated logical diagram (System Control Diagram (SCD)), for use in the continuous control process industry – e.g. as used in Oil and Gas processes. The main drivers for establishing this as a standard are the advantage of efficient engineering, implementation, and commissioning, as well as reuse of the…

ISO 19160-4:2017 defines key terms for postal addressing, postal address components and constraints on their use. Specifically, ISO 19160-4:2017 defines postal address components organized into three hierarchical levels: - elements, such as organization name or postcode, which have well-defined conceptual meaning and are not themselves made up of subordinate components, though they may be…

The ISO 16410 series provides a suite of tests in order to assess compliance of the Front End and Back End behaviours in relation to the requirements in ISO 17575‑3. ISO 16410-1:2017 contains the definition of such tests in the form of test purposes, listing the required initial conditions, references and individual steps in a structured textual manner. ISO 16410‑2 contains the identical tests…

ISO 4250-1:2017 specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165. The ISO 4250 series consists of three parts which specify the technical elements relating to designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres.

This standard defines PHY and MAC specifications for high data rate wireless connectivity (typically over 200 Mbps) with fixed, portable, and moving devices. Data rates are high enough to satisfy a set of consumer multimedia industry needs, as well as to support emerging wireless switched point-to-point and high rate close proximity point-to-point applications.

ISO 6707-2:2017 defines terms applicable to contracts and communication in relation to buildings and civil engineering works.

This standard defines PHY and MAC specifications for high data rate wireless connectivity (typically over 200 Mbps) with fixed, portable, and moving devices. Data rates are high enough to satisfy a set of consumer multimedia industry needs, as well as to support emerging wireless switched point-to-point and high rate close proximity point-to-point applications.

This standard specifies the physical, durability, mechanical and hydraulic characteristics as well as test methods of geotextiles used for reinforcement, separation, protection or filtration purposes in road construction. This standard targets the quality and performance of geotextiles. Geotextiles used mainly for drainage or soil massive reinforcement are not covered by this standard. They…