Rechercher

ISO 11237 specifies requirements for five types of compact, wire-braid-reinforced hose and hose assembly of nominal size from 5 to 31,5. They are suitable for use with - oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C; - water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging…

ISO/IEC TS 29167-15:2017 defines a coding suite based on an exclusive or (XOR) operation for the ISO/IEC 18000 air interfaces standards for radio frequency identification (RFID) systems. In particular, it specifies the use of XOR as a basic way to hide plain data in the identity authentication and secure communication procedures. The coding suite is defined in alignment with existing air…

ISO/IEC TS 29167-15:2017 defines a coding suite based on an exclusive or (XOR) operation for the ISO/IEC 18000 air interfaces standards for radio frequency identification (RFID) systems. In particular, it specifies the use of XOR as a basic way to hide plain data in the identity authentication and secure communication procedures. The coding suite is defined in alignment with existing air…

This Standard applies to line isolation monitors designed to be installed and used as an ancillary part of a single-phase isolated (ungrounded) power distribution system not exceeding 300 V in accordance with the rules of the Canadian Electrical Code, Part I, including any rules that are applicable particularly to anaesthetizing locations and other patient care areas in hospitals and other health…

1.1 This Standard applies to newly produced, outdoor cooking specialty gas appliances (see Clause 3), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials. Appliances submitted for examination under this Standard areclassified as portable or stationary. These products are not intended for commercial use. 1.2 This Standard applies to recreational…

1.1 The requirements specified in this Standard cover light emitting diode (LED) equipment that is an integral part of a luminaire or other lighting equipment, and which operates in the visible light spectrum between 400 and 700 nm. These requirements also cover the component parts of LED equipment, including LED controlgear, controllers, arrays, modules, and packages, as defined in this…

1.1 General This part of the IEC 62443 series is a technical specification which defines the terminology, concepts and models for Industrial Automation and Control Systems (IACS) security. It establishes the basis for the remaining standards in the IEC 62443 series. To fully articulate the systems and components the IEC 62443 series address, the range of coverage may be defined and understood…

This part of IEC 62443 defines the elements necessary to establish a cyber security management system (CSMS) for industrial automation and control systems (IACS) and provides guidance on how to develop those elements. This standard uses the broad definition and scope of what constitutes an IACS described in IEC/TS 62443-1-1. The elements of a CSMS described in this standard are mostly policy,…

This part of IEC 62443, which is a Technical Report, describes requirements for asset owners and industrial automation and control system (IACS) product suppliers that have established and are now maintaining an IACS patch management program. This Technical Report recommends a defined format for the distribution of information about security patches from asset owners to IACS product suppliers, a…

counter-measures, and technologies that may effectively apply to the modern electronically based IACSs regulating and monitoring numerous industries and critical infrastructures. It describes several categories of control system-centric cybersecurity technologies, the types of products available in those categories, the pros and cons of using those products in the automated IACS environments,…