Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphou...
IEC 60404-16:2018 is applicable to Fe-based amorphous strips specified in IEC 60404-8-11 for the measurement of AC magnetic properties at frequencies up to 400 Hz.
The object of this part is to define the general principles and technical details of the measurement of the magnetic properties of Fe-based amorphous strips by means of a single sheet tester.
The contents of the corrigendum of…
Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip d...
IEC 60404-8-11:2018 defines the grades of Fe-based amorphous strip delivered in the semi‑processed state, i.e. without final heat treatment, of nominal thickness 0,025 mm. Other nominal thicknesses in the range from 0,020 mm to 0,030 mm can be specified by agreement between the manufacturer and the purchaser at the time of enquiry and order. In particular, it gives general requirements, magnetic…
Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol c...
ISO 15118-4:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an EVCC or SECC according to ISO 15118-2. These conformance tests specify the testing of capabilities and behaviors of an SUT as well as checking what is observed against the conformance requirements specified in ISO 15118-2 and against what the supplier states the…
Road vehicles - Vehicles to grid communication interface - Part 5: Physical and data link layer conf...
ISO 15118-5:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an Electric Vehicle or Supply Equipment Communication Controller (EVCC or SECC) with support for PLC-based High Level Communication (HLC) and Basic Signaling according to ISO 15118‑3. These conformance tests specify the testing of capabilities and behaviors of an SUT…
Information technology — MPEG video technologies — Part 4: Video tool library
ISO/IEC 23002-4:2018 defines the description of the MPEG video tool library (VTL) based on the decoder description specified in ISO/IEC 23001-4. This tool library defines the specification of FUs, which are sufficient to build complete decoding solutions according to the following coding standards:
- ISO/IEC 14496-2 (MPEG-4 Simple Profile),
- ISO/IEC 14496-10 (MPEG-4 AVC Constrained…
Road vehicles — Vehicle to grid communication interface — Part 5: Physical layer and data link layer...
ISO 15118-5:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an Electric Vehicle or Supply Equipment Communication Controller (EVCC or SECC) with support for PLC-based High Level Communication (HLC) and Basic Signaling according to ISO 15118‑3. These conformance tests specify the testing of capabilities and behaviors of an SUT…
Information technology - MPEG video technologies - Part 4: Video tool library
ISO/IEC 23002-4:2018 defines the description of the MPEG video tool library (VTL) based on the decoder description specified in ISO/IEC 23001-4. This tool library defines the specification of FUs, which are sufficient to build complete decoding solutions according to the following coding standards:
- ISO/IEC 14496-2 (MPEG-4 Simple Profile),
- ISO/IEC 14496-10 (MPEG-4 AVC Constrained…
Road vehicles — Vehicle to grid communication interface — Part 4: Network and application protocol c...
ISO 15118-4:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an EVCC or SECC according to ISO 15118-2. These conformance tests specify the testing of capabilities and behaviors of an SUT as well as checking what is observed against the conformance requirements specified in ISO 15118-2 and against what the supplier states the…
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the m...
ISO 9631:2018 specifies material requirements for vulcanized rubber seals for hot drinking and non-drinking water supply (up to 110 °C).
The different seal designations specified are defined according to seal type, seal application and the requirements for a particular seal (see Table 2).
General requirements for finished joint seals are also given. Any additional requirements called for by the…
Internal combustion engines — Piston rings — Part 1: Vocabulary
ISO 6621-1:2018 defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings.
The terms and definitions in this document apply to piston rings for reciprocating internal combustion engines. They may also be used for piston rings of compressors working under analogous conditions.
NOTE 1 Further…
