Rechercher

IEC 62106-5:2018 defines receiver profiles and criteria that can be used for marking RDS receiver devices. IEC 62106-5:2018 together with IEC 62106-1, IEC 62106-2, IEC 62106-3, IEC 62106-4 and IEC 62106-6, cancels and replaces IEC 62106:2015, and constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 62106:2015: • provision…

IEC 62239-1:2018 defines the requirements for developing an electronic components management plan (ECMP) to guarantee to customers that all of the electronic components in the equipment of the plan owner are selected and applied in controlled processes compatible with the end application and that the technical requirements detailed in Clause 4 are accomplished. In general, the plan owner of a…

This document series describes a generic system for the exchange of data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging product data can involve: — chassis manufacturer; — chassis importer; — chassis dealer; — one or more bodywork manufacturers;…

This document establishes the application of ISO 8686-1 to tower cranes for construction work as defined in ISO 4306-3, and gives specific requirements and values for factors to be used at the structural calculation. Tower cranes for construction work are exclusively equipped with a hook as the load-handling device. For tower cranes intended to be used for other purposes and/or with other load-…

This document specifies two different grades of disc springs. Grade A defines basic requirements of disc springs for static applications with low and moderate performance. Springs manufactured according to Grade A are not used for dynamic applications. Grade B defines requirements on disc springs especially used for dynamic applications and high performance static applications. Disc springs…

IEC TR 61850-90-6:2018, which is a technical report, provides basic aspects that need to be considered when using IEC 61850 for information exchange between systems and components to support Distribution Automation applications, within MV network automation, as presented in Annex B. The contents of Distribution Automation (DA) vary between different countries, regions, even between different…

The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability. For the purposes of the ISO 22915 series, industrial trucks are wheeled, self‑propelled or pedestrian‑propelled vehicles, excepting those running on rails. They are either operator‑controlled or driverless and designed to carry, tow, push,…

1 Scope 1.1 These requirements cover the electrical system of unmanned aircraft systems (UASs), as defined in this Standard, used in flight for commercial applications or flight incidental to business applications. UASs covered by these requirements are intended to be operated by certified UAS pilots as identified in the Federal Regulations, where the unmanned aircraft is less than 25 kg (55…

This document specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from — accelerated tests, — exposure to corrosive environments, and — practical…

The purpose of this document is to provide guidance for developers of visual external communication systems for automated vehicles (AV), particularly Automated Driving System ? Dedicated Vehicles (ADS-DV), as defined by SAE J3016. The main objective of this document is to propose how ADS-DVs could communicate with other road users via an external communication system. It discusses the…