Rechercher

This document specifies rules and code structures associated with the data constructs for RFID for item management. In particular, it: — defines the application family identifier (AFI), including the range of code values that are available to use for RFID for item management; — defines the data format, including the range of code values that are available to use for RFID for…

IEC 62496-4-1:2019 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row twelve-channel polymer waveguides for a PMT connector and a waveguide OCB that can be interconnected with a terminated MT ferrule. Keywords: interface dimensions for a terminated waveguide optical circuit board (OCB)

IEC 62902:2019 specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology). The markings described in this document are applicable for secondary cells, batteries, battery modules and monoblocs with a volume of more than 900 cm3. The marking of the chemistry is useful for the…

1 Scope 1.1 This Standard specifies test procedures and minimum performance requirements for general service integrated lamps and small diameter directional lamps. 1.2 This Standard includes common testing procedures and performance requirements applicable to all general service integrated lamps, as well as some specific testing procedures and performance requirements applicable to non-solid-…

1 Scope This service definition is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a service type referred to herein as ScheduledRecording service. The ScheduledRecording service is a UPnP service that allows control points to schedule the recording of content. Generally, this content is broadcast content, but this specification does not limit itself to broadcast…

1 Scope This document specifies the characteristics of a device that manages connectivity to the Internet as an “edge” device between a residential Local Area Network and a Wide Area Network. The gateway can be physically implemented as a standalone device, or logically as a set of UPnP devices and services on a PC. This specified device is intended to be controlled from inside the home…

1 Scope This service template is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a service type referred to herein as RenderingControl. 1.1 Introduction Most rendering devices contain a number of dynamically configurable attributes that affect how the current content is rendered. For example, video rendering devices, such as TVs, allow user control of display…

1 Scope 1.1 This Standard is intended to provide basic requirements for the evaluation of double-insulated cord- connected electrical equipment. 1.2 This Standard applies to equipment for use on branch circuits installed in accordance with CSA C22.1, Canadian Electrical Code, Part I, and not exceeding 250 V-to-ground. 1.3 This Standard supplements individual standards of the Canadian…

1 Scope 1.1 This Standard applies to products and component devices where the electronics technology handles the operational logic including the safety features. This Standard applies to the following configurations: a) safety control function(s) implemented in hardware only; and b) safety control function(s) implemented in some combinations of hardware and software. Note: Clauses that are…

1 Scope This document describes an architecture that allows UPnP Telephony devices, services and control points defined in the propoded DCP to be deployed in the home network environment and to enable management of incoming and outgoing telephony calls, messaging, presence information and phone features configuration through UPnP means from devices within the home. In order to accommodate…