Rechercher

IEC TR 61850-90-6:2018, which is a technical report, provides basic aspects that need to be considered when using IEC 61850 for information exchange between systems and components to support Distribution Automation applications, within MV network automation, as presented in Annex B. The contents of Distribution Automation (DA) vary between different countries, regions, even between different…

This document establishes the application of ISO 8686-1 to tower cranes for construction work as defined in ISO 4306-3, and gives specific requirements and values for factors to be used at the structural calculation. Tower cranes for construction work are exclusively equipped with a hook as the load-handling device. For tower cranes intended to be used for other purposes and/or with other load-…

This document specifies two different grades of disc springs. Grade A defines basic requirements of disc springs for static applications with low and moderate performance. Springs manufactured according to Grade A are not used for dynamic applications. Grade B defines requirements on disc springs especially used for dynamic applications and high performance static applications. Disc springs…

The ISO 22915 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability. For the purposes of the ISO 22915 series, industrial trucks are wheeled, self‑propelled or pedestrian‑propelled vehicles, excepting those running on rails. They are either operator‑controlled or driverless and designed to carry, tow, push,…

1 Scope 1.1 These requirements cover the electrical system of unmanned aircraft systems (UASs), as defined in this Standard, used in flight for commercial applications or flight incidental to business applications. UASs covered by these requirements are intended to be operated by certified UAS pilots as identified in the Federal Regulations, where the unmanned aircraft is less than 25 kg (55…

This document specifies a chart rating system based on standard charts that provides a means of defining levels of performance of anodic oxidation coatings on aluminium and its alloys that have been subjected to corrosion tests. This rating system is applicable to pitting corrosion resulting from — accelerated tests, — exposure to corrosive environments, and — practical…

The purpose of this document is to provide guidance for developers of visual external communication systems for automated vehicles (AV), particularly Automated Driving System ? Dedicated Vehicles (ADS-DV), as defined by SAE J3016. The main objective of this document is to propose how ADS-DVs could communicate with other road users via an external communication system. It discusses the…

This document specifies some characteristics of TPMS snap-in valves geometry, valve hole of the rim, mounting process and valve limits. These parameters are defined to facilitate the use of snap-in valve for TPMS applications on passenger vehicles in different countries.

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery (EMM) as defined in ISO 6165 and their attachments.

This document specifies grading procedures for visually and mechanically sorting round, or pole, bamboo for structural applications using such fundamental elements. Visual sorting is based on observable characteristics of the piece(s). Mechanical sorting is based on non-destructive measurement of properties known to correlate to characteristic values defining a grade. The grading procedures in…