Rechercher

This International Standard is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. NOTE 1 The equipment is not designed to generate heat. NOTE 2 The effectiveness of the protection against…

1 Scope 1.1 This Standard applies to gas hose connectors (See Clause 3 Definitions), hereinafter referred to as connectors. They are conduits for conveying gas and depend for gas-tightness on the wall structure of the hose material. Such connectors are: a) newly produced and constructed entirely of new, unused parts and materials; and b) equipped with a fitting at each end provided with…

1 Scope 1.1 This Standard provides criteria and requirements for the design of a durable building and its building elements and includes provisions for cost analysis and management and for a quality management program for the design, construction, operation, maintenance, repair, and renovation of a building and its building elements. 1.2 This Standard applies to the building and to building…

1 Scope 1.1 This Standard covers controlled outlets, equipped with or without locking or non-locking receptacle configurations, for permanently connected branch circuit installation, rated up to and including 600 V, 60A and intended to be installed in ordinary locations in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.2 This Standard also covers outlets that might be…

1.1 Organization and content This standard sets out the requirements for designing, manufacturing and marking of UN standardized large packagings and for selecting and using large packagings for the transportation of dangerous goods of Class 3, 4, 5, 6.1, 8 and 9. This standard consists of two parts and two annexes. Part I contains the requirements for the design, manufacture and marking of…

This document specifies a hardness test method for plastics using instrumented indentation in the micro scale with one clearly defined test condition to ensure reproducibility and comparability of test results. The test method is selectively suitable for use with the following materials: — moulding, extrusion and cast thermoplastic materials; rigid and semi-rigid thermoplastics sheets…

This document provides procedures that can be used as a secondary task in a dual task setting to determine whether that evaluation setting is standardized and valid for purposes of assessing driver attentional demand due to the use of an in-vehicle system. This document does not define calibration procedures for other evaluation activities that a laboratory might undertake. This document provides…

This document provides a uniform basis for determining the exposure times for all types of shutters used in still cameras and contains suitable definitions of the terms used. It specifies the exposure-time markings for all types of shutters and their tolerances. The characteristics of all types of mechanical shutters, which are mounted in still cameras and affect the control of exposure, motion-…

This document specifies the technical requirements, test methods, inspection rules and markings for major components of emergency towing arrangements (ETA) provided for tankers, gas carriers (LPG, LNG, etc.) and chemical vessels no less than 20 000 deadweight tonnes (DWT). It is only applicable to emergency towing arrangements as defined in 3.1. NOTE For any other applications, such as for…

This document defines special terms used in the field of coating powders. Other terms and definitions related to paints and varnishes are given in ISO 4618.