Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavit...
This document defines an identification code for hydraulic valve mounting surfaces and for hydraulic cartridge valve cavities that are defined in other International Standards (see Bibliography).
This document is not applicable to mounting surfaces and cartridge valve cavities that do not conform to these International Standards.
This document does not require that the hardware be marked with the…
Petroleum and natural gas industry — Pipeline transportation systems — Geological hazard risk manage...
This document specifies requirements and gives recommendations on the management of geohazard risks during the pipeline design, construction and operational periods.
This document is applicable to all operators and pipelines (existing and proposed/under construction).
This document applies to onshore gathering and transmission pipelines used in the petroleum and natural gas industries.
NOTE…
Snow throwers — Safety requirements and test procedures — Part 1: Terminology and common tests
This document defines terms and definitions and common test methods applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-2, ISO 8437-3 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled and ride-on snow throwers.
The ISO 8437 series deals with significant hazards, hazardous…
Information technologies — JPEG systems — Part 5: JPEG universal metadata box format (JUMBF)
This document describes the JPEG universal metadata box format (JUMBF), which provides a universal format to embed any type of metadata in any box-based JPEG file format. This document defines the syntax of the JUMBF box and the mechanism to assign specific content types. In particular, this document specifies XML, JSON, codestream and UUID types. In addition, this document defines the syntax to…
Information technologies - JPEG systems - Part 5: JPEG universal metadata box format (JUMBF)
This document describes the JPEG universal metadata box format (JUMBF), which provides a universal format to embed any type of metadata in any box-based JPEG file format. This document defines the syntax of the JUMBF box and the mechanism to assign specific content types. In particular, this document specifies XML, JSON, codestream and UUID types. In addition, this document defines the syntax to…
Plastics — Determination of tensile properties — Part 1: General principles
1.1 This document specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. Several different types of test specimen are defined to suit different types of material which are detailed in subsequent parts of ISO 527.
1.2 The methods are used to investigate the tensile behaviour of the test specimens and for…
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-wel...
This document specifies test specimens and procedures for performing constant load amplitude fatigue tests on multi-spot-welded and multi-axial specimens in the thickness range from 0,5 mm to 5 mm at room temperature and a relative humidity of maximum 80 %. The applicability of this document to larger thicknesses can be limited by mechanical properties such as yield strength and formability of…
Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 6: Test an...
IEC 62830-6:2019(E) defines terms, definitions, symbols, and specifies configurations and test methods to be used to evaluate and determine the performance characteristics of vertical contact mode triboelectric energy harvesting devices for practical use. This document is applicable to energy harvesting devices as power sources for wearable devices and wireless sensors used in healthcare…
