Rechercher

This document specifies short-range wireless active communication between two active IoT/telematic hardware items, such as a gateway device and/or a sensor. NOTE            Active hardware item in this document refers to devices and sensors, which have capacity to record and transmit measurements, i.e. data, without external activation through extra accessories, e.g. readers or scanners. The…

This document specifies the requirements for testing principles and systems to produce comparable results with regard to location, type and size of discontinuities in rails. This document does not aim to give any guidelines for managing the result of ultrasonic rail testing. This document only applies to flat bottom (Vignole) railway rail profile 43 kg/m and above. This document only applies to…

IEC 60034-2-3:2024 specifies test methods and an interpolation procedure for determining losses and efficiencies of converter-fed motors. The motor is then part of a variable frequency power drive system (PDS) as defined in IEC 61800‑9‑2. This document also specifies procedures to determine motor losses at any load point (torque, speed) within the constant flux range (constant torque range, base…

IEC 60034-2-2:2024 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034‑2‑1. These methods apply when full-load testing is not practical and results in a greater uncertainty. The specific methods described are: - Calibrated-machine method. - Retardation method. - Calorimetric method…

IEC TS 62443-6-1:2024 specifies the evaluation methodology to support interested parties (e.g. during conformity assessment activities) to achieve repeatable and reproducible evaluation results against IEC 62443-2-4 requirements. This document is intended for first-party, second-party or third-party conformity assessment activity, for example by product suppliers, service providers, asset owners…

This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of LENS REMOVAL DEVICES and VITRECTOMY DEVICES for ophthalmic surgery (as defined in 201.3.209 and 201.3.217) and associated ACCESSORIES that can be connected to this MEDICAL ELECTRICAL EQUIPMENT, hereafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to…

The ISO/IEC 30137 series is applicable to the use of biometrics in VSSs (also known as closed circuit television or CCTV systems) for a number of scenarios, including real-time operation against watchlists and in post-event analysis of video data. In most cases, the biometric mode of choice will be face recognition, but this document also provides guidance for other modalities, such as gait…

The ISO/IEC 30137 series is applicable to the use of biometrics in VSSs (also known as closed circuit television or CCTV systems) for a number of scenarios, including real-time operation against watchlists and in post-event analysis of video data. In most cases, the biometric mode of choice will be face recognition, but this document also provides guidance for other modalities, such as gait…

This document establishes requirements for interoperability among systems developed for management and/or control of irrigation facilities. It can be applied under any technological platform and irrigation system, regardless of the water management scheme, with the exception of irrigation mobile machinery, including centre pivots and linear irrigation machines. Due to the dynamic nature of these…

IEC TS 60825-19:2024 specifies the velocity-dependent closest points of human access (VCPHA) for the classification of moving platform laser products when considering the movement of the platform with respect to a stationary frame of reference. This presupposes that the inherent kinetic hazard of the moving platform creates a zone in which persons would not be reasonably expected to be located.…