Rechercher

IEC 63077:2019 describes and defines the PROCESS of REFURBISHMENT of USED MEDICAL IMAGING EQUIPMENT and applies to the restoring of USED MEDICAL IMAGING EQUIPMENT to a condition of safety and performance comparable to that of new MEDICAL IMAGING EQUIPMENT i.e. MEDICAL IMAGING EQUIPMENT that was not in use. This restoration includes actions such as REPAIR, REWORK, software/hardware updates, and…

IEC/TR 62343-6-11: 2019 which is a Technical Report, proposes a software and hardware interface for the optical multicast switch (MCS). This switch can be controlled by resident firmware within the interface that is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch settings. The MCS is defined in IEC 62343-3-4. The technical information regarding MCS…

This document specifies a test to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. The document has been developed to measure the pH-dependent release of inorganic and organic substances from soil and soil-like material as well as to produce eluates for subsequent ecotoxicological testing. For ecotoxicological testing, see ISO 15799 and…

IEC 62645:2019 establishes requirements and provides guidance for the development and management of effective computer security programmes for I&C programmable digital systems. Inherent to these requirements and guidance is the criterion that the power plant I&C programmable digital system security programme complies with the applicable country’s requirements. This document defines…

This document defines a process to identify, assess, control, and monitor the risks associated with hazardous biological materials. This document is applicable to any laboratory or other organization that works with, stores, transports, and/or disposes of hazardous biological materials. This document is intended to complement existing International Standards for laboratories. This document is not…

This document defines practical methods for determining the heat-leak performance of cryogenic vessels. The methods include measurement on both open and closed systems. This document neither specifies the requirement levels for insulation performance nor when the defined methods are applied.

1 Scope 1.1 This standard provides the requirements for relocatable buildings. Note: See Section 4 Glossary, Annex C and Section D3. 1.2 This Standard applies to relocatable buildings where the major occupancy, as defined in the National Building Code of Canada, is: a) Group A, Division 2; b) Group C, except that the standard does not apply to buildings containing dwelling units; c) Group…

This document describes the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of the ISO/IEC 18013 series for: — machine readable technologies (ISO/IEC 18013-2), and — access control, authentication and integrity validation (ISO/IEC 18013-3). The test methods described in this document are…

ISO 21919 describes interfaces for automated machine tending of at least one computer numerically controlled (CNC) machine by using a machine tending device. These interfaces are the link between automated machine tending devices and machines used for production. The automated machine tending is initiated by either the machine tending system or by the machine. This document gives an overview and…

This document describes the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of the ISO/IEC 18013 series for: — machine readable technologies (ISO/IEC 18013-2), and — access control, authentication and integrity validation (ISO/IEC 18013-3). The test methods described in this document are…