Rechercher

1 Scope 1.1 This Standard applies to gas convenience outlets, hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at temperatures between 32 °F and 200 °F (0 °C and 93.3 °C) if intended for indoor use only, or between –20 °F and 200 °F (–28.8 °C and 93.3 °C) if intended for indoor/…

1 Scope 1.1 This Standard applies to newly produced gas selector devices (see Clause 3), herein after referred to as a “device”, constructed entirely of new, unused parts and materials. 1.2 The device may include functions such as selection of type of gas to operate the appliance and main burner primary air adjustment. The device may also contain multiple passageways that can be selected to…

1 Scope 1.1 Inclusions of the Standard 1.1.1 Purpose of this Standard The purpose of this Standard is to provide compliance criteria and guidance on the design of flood- resilient new residential communities as it relates to greenfield development only. 1.1.2 Building types This Standard is applicable to the following building types: a) detached homes; b) semi-detached homes; c) row…

1 Scope 1.1 This Standard provides requirements for the planning, design, construction, commissioning, operation, and maintenance of HVAC systems in HCFs. In general, these requirements are more stringent than those applied to non-health care facilities. Note: See Annex A for general guidelines on HVAC system design. Table 1 provides specific design parameters for HVAC systems. 1.2 This…

1 Scope 1.1 This Standard provides requirements for the performance, testing, and marking of hand-held barbecue grill brushes and replacement heads with metal bristles for consumer use, intended to clean cooking surfaces of barbecue grills. 1.2 This Standard does not cover the effectiveness of barbecue grill brushes to clean cooking surfaces of barbecue grills. 1.3 This Standard does not…

1 Scope 1.1 This Standard describes methods for the preparation of low-basis weight handsheets of cellulose filaments (CF) and CF-reinforced pulp handsheets to be used for physical tests. 1.2 This Standard also covers the preparation of low-basis weight handsheets of cellulose microfibrils (CMF) and cellulose nanofibrils (CNF), and CMF- or CNF-reinforced pulp handsheets, provided that…

1 Scope This part of the ISO/IEC 19794 standard specifies a data record interchange format for storing, recording, and transmitting the information from one or more finger or palm image areas within an ISO/IEC 19785-1 CBEFF data structure. This can be used for the exchange and comparison of finger image data. It defines the content, format, and units of measurement for the exchange of finger…

1 Scope This part of ISO/IEC 19794 specifies an image interchange format for biometric person identification or verification technologies that utilize human vascular biometric images and may be used for the exchange and comparison of vascular image data. It specifies a data record interchange format for storing, recording, and transmitting vascular biometric information from one or more areas…

1 Scope For the purposes of biometric verification and/or identification, this part of ISO/IEC 19794 specifies a concept and data interchange formats for dynamic signature/sign behavioural data captured in the form of a time series using devices such as digitizing tablets or advanced pen systems. The data interchange formats are generic in that they may be applied and used in a wide range of…

1 Scope 1.1 This Standard establishes steady-state voltage operating ranges at point of connection for AC power systems in Canada. It serves to provide guidance a) to national committees on utilization and control equipment for establishing standard ratings of such equipment on a basis coordinated with power system voltages; b) to power system designers so that new systems will be designed…