Rechercher

1 Scope 1.1 This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and other plumbing fixtures and specifies requirements for materials, design, methods of operation, test methods, and markings. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard…

1 Scope 1.1 This Standard covers water temperature limiting devices intended to limit the hot or tempered water temperature supplied to fittings for fixtures such as sinks, bidets, lavatories, and bathtubs to reduce the risk of scalding. These devices are not designed to address thermal shock. Note: Unless otherwise specified in this Standard, water temperature limiting devices are referred to…

1 Scope 1.1 This Standard applies to cord-connected and permanently connected electrically heated pottery kilns for use on nominal system voltages of 600 V or less, designed to be used in accordance with the rules of CSA C22.1, Canadian Electrical Code, Part I. 1.2 This Standard does not apply to electrical equipment employing high-frequency currents or industrial heating equipment. 1.3 In…

1 Scope 1.1 This Standard applies to extra-low-voltage landscape lighting systems and associated components that are intended for cord-connected, direct plug-in, or permanent connection to a branch circuit of not more than 150 volts-to-ground in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard only covers extra-low-voltage landscape lighting systems where the maximum…

IEC 62715-6-3:2020 (E) is to define the standard test methods to evaluate the mechanical robustness of flexible display modules, especially mechanical robustness regarding impact and hardness, which include displays such as liquid crystal displays (LCDs), e-paper, and organic light emitting diode (OLED) displays, against external forces applied to a panel.

IEC 60645-3:2020 specifies a means of describing the physical characteristics, in terms of electrical waveforms, of audiometric reference and test signals of short duration and methods for their measurement. The object of this document is to ensure that audiometric stimuli of short duration are specified and measured in the same way and that the calibration of equipment using such signals is…

IEC 60601-2-21:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60601-2-21:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT RADIANT WARMERS as defined in…

IEC 60601-2-21:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT RADIANT WARMERS as defined in 201.3.204, also referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to…

This document specifies how to describe the characteristics of banking products or services (BPoS) from a customer's perspective. Characteristics of a BPoS can be observed from different facets, called key elements, which are divided into three groups: required, optional or voluntary elements. This document elaborates on the purpose, content and description approach for the required and…

This document specifies minimum performance and information requirements for monitoring devices of bulk milk cooling tanks as part of milking and milk cooling machinery installations in agricultural operations. It also specifies the minimum requirements for materials, design and installation. The purpose of this document is to contribute to a high-quality milk production by monitoring, collecting…