Rechercher

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) MOTORCOMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested…

1 Scope 1.1 This Standard applies to single- and multi-conductor Type TECK 90 armoured cable intended for installation in accordance with the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less and having a maximum temperature rating of 90 °C in both dry and wet locations. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision…

1 Scope 1.1 Electrical equipment covered by this Standard 1.1.1 Application This Standard applies to the electrical equipment for a) elevators covered by ASME A17.1/CSA B44 and ASME A17.8/CSA B44.8; b) escalators; c) moving walks; d) dumbwaiters; e) material lifts; f) manlifts; and g) platform lifts and stair lifts for barrier-free access (see CSA B355), and platform lifts and stairway…

IEC 62933-4-2:2025 defines the requirements for evaluating and reporting the negative impact on the environment caused by the failure of a cell, flow cell, battery or flow battery in the accumulation subsystem of a battery energy storage system (BESS). The batteries within this scope used in a BESS are classified according to the type of their electrolyte. These electrolyte types are aqueous,…

This document outlines specifications for gold and gold alloy coatings, including double, multi-layered, and rolled gold coatings, by defining the minimum mass, thickness, and fineness requirements. The specifications apply to all gold coatings, whether applied on precious or non-precious jewellery and general decorative items. Additionally, this document defines the current vocabulary for gold…

This document specifies a unified logical data model based on available existing dynamic information standards. The data has precise relative location references to be linked with ISO/TS 22726-1 which specifies the architecture and the logical data model of static map data for connected and automated driving applications. Dynamic event data comes from external systems and has been defined and…

This document defines the terminology and develops concepts for profile morphological segmentation. In particular it specifies the watershed segmentation method, the Wolf pruning method and the crossing-the-line method. This document assumes a continuous surface.

IEC 63522-39:2025 is used for testing all kind of relays and shall evaluate their ability to perform under expected conditions of transportation, storage and all aspects of operational use. This document defines standard test methods for: 1. measuring the insertion and withdrawal forces of the mating relay and socket; 2. measuring the insertion and withdrawal forces on relays with flat…

IEC 63522-36:2025 is used for testing all kinds of relays and evaluates their ability to perform under expected conditions of transportation, storage, and all aspects of operational use. This document defines a standard test method to measure fire hazards of all materials susceptible to fire hazards.

IEC 63522-35:2025 is used for testing all kind of relays within the scope of technical committee 94 and evaluates their ability to perform under expected conditions of transportation, storage and all aspects of operational use. This document defines a standard test method for resistance to cleaning solvents.