Rechercher

Defines the terms and establishes the methods for determining linear dimensions, areas and volumes for commercial refrigerated cabinets intended for the sale and/or display of food products. - Replaces ISO recommendation R 1992-1971.

1. SCOPE 1.1 This Standard applies to complete, flue-connected, oil-fired warm air appliances, irrespective of the heating capacity or the type of burner used. 1.2 The requirements given herein apply to appliances intended for installation with the appliance base placed upon the floor, except as provided for in Clause 1.4; and intended to be used with pipes or ducts for the…

Applies both to cutters with inserted teeth, made from high speed steel or with brazed carbide tips, and to cutters equipped with indexable carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used bith spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. The general fitting…

These cutters are equipped either with high speed steel inserted teeth or with inserted teeth with brazed carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used with both spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. Dimensions for centring arbors and fitting dimensions…

Defines the physical and magnetic characteristics for interchange of magnetic six-disk packs in order to facilitate the interchange of data between electronic data processing systems. Does not apply to a specific design. It defines only the parameters relevant for interchange.

Defines the physical and magnetic characteristics for interchange of magnetic six-disk packs in order to facilitate the interchange of data between electronic data processing systems. Does not apply to a specific design. It defines only the parameters relevant for interchange.

For application in equipment containing semiconductor devices for circuits up to 1000 V a.c. to circuits of nominal voltages up to 1500 V d.c. Establishes characteristics of semiconductor fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics provided their dimensions are identical. Defines standard conditions for operation in service,…

Gives rules defining the checks and tests suitable for verifying the operating characteristics. Applies to pantographs used on rolling stock supplied from a d.c. or single-phase overhead contact system with a nominal voltage of 600 V and above.

States and defines test methods of interest to the users for measuring the principal performance characteristics of household electric washing machines. This standard is concerned neither with safety nor with performance requirements. This standard is applicable to horizontal drum type electric clothes washing machines, to spin extractors and to washing and spinning machines for household use. It…

Provides fundamental definitions for general use in time domain pulse technology. It defines terms for pulse phenomena and characteristics which are prerequisite for efficient communication of technical information. It also defines terms for standards for methods of pulse characteristics measurement, for pulse apparatus, and for apparatus which employ pulse techniques.