Rechercher

Provides data and guidance for the design, manufacture and inspection of the involute splines. Limiting dimensions, tolerances and manufacturing errors are defined and tabulated. Linear and angular dimensions are expressed in mm and degrees, respectively.

Specifies the tests and procedures to be followed in order to verify that a crane conforms to its operational specifications and is capable of lifting rated loads. Where rated loads are determined by stability, a test procedure and test load are specified that permit stability margins to be easily verified. Defines test procedures such as conformity tests, visual inspection and load lifting…

1. Scope 1.1 This Standard covers and is restricted to fibre core wire ropes used for hoisting, compensating and governor purposes in passenger elevators, freight elevators, dumbwaiters, personnel hoists and manlifts, all as defined in CSA Standards B44, Safety Code for Elevators, Dumbwaiters, Escalators, and Moving Walks; B311, Safety Code for Manlifts; and Z185, Safety Code for Personnel…

Defines a procedure for obtaining and for assessing the data necessary to establish long-time stress rupture values for steels for pressure purposes for steels where properties different from those internationally agreed are being claimed. The purpose of a standard procedure is to minimize any differences in long-time estimates obtained in different countries due to differences in the quantity…

Defines a classification of dust separators, gives their operating principles and defines their characteristics. Examples are given of each class of dust separator, but this list is not exhaustive. Symbols are given for each class of dust separator and these shall be used as the basis for symbols for more complex types of separator.

Defines, in both English and French, terminology pertaining to dental science, dental materials, dental equipment and the practice of dentistry. Establishes translations of terms between the two official languages. It is anticipated that additions to the contents of the standard will be made annually.

This method is applicable to fibres taken from raw or partially processed cotton, but not to fibres taken from blends of cotton with other fibres, or to fibres recovered from cotton yarns or fabrics. The main terms are defined.

Applies to single and double sided printed boards without through connections irrespective of their method of manufacture. Is intended as a basis on which agreements between purchaser and vendor can be made. Defines the characteristics and establishes uniform requirements for judging properties and dimensions.

Applies to single and double sided printed boards with through connections irrespective of their method of manufacture. Is intended as a basis on which agreements between purchaser and vendor can be made. Defines the characteristics to be assessed, the test methods to be used and establishes uniform requirements for judging properties and dimensions.

States and defines the characteristics of importance for determining the performance of household electric dishwashers in order to inform the consumer and describes the standard methods for measuring these characteristics. The contents of the corrigendum of January 1998 have been included in this copy.