Rechercher

Is intended as a reference document to be consulted in conjunction with the ISO-Standard for the size designation of clothes applicable to the garment under consideration. Defines body dimensions and describes their measurement.

Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.

Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.

Establishes provisions for the safe design, construction, installation and operation of stationary and skid-mounted compressors. Specifies requirements to help minimizing compressor accidents and defines general safety practices for the field. It does not apply to prime movers. The following types of compressor are excluded: with a shaft input less than 2 kW; with an effective discharge pressure…

Defines terms relating to the dimensions of mopeds and motorcycles, but does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the dimensions defined. Applies to mopeds and motorcycles as defined in ISO 3833, with the exception of three-wheeled vehicles.

Establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. Applies to earth-moving machinery fitted with ROPS.

This second edition cancels and replaces the first edition (i. e. ISO 2079:1973). Defines a nuber of generic terms for which the definition is considered necessary in order clarify the scope of these processes. In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard includes the equivalent terms in the German language.

Defines the electrical characteristics with which flasher units shall comply when submitted for acceptance. Applies to flashers intended for use on motor vehicles with 12 V or 24 V systems, which may or may not be equipped for a towed vehicle. Can be applied to motorcycles. Not applicable to two-level luminous intensity devices.

This part of ISO 3134 defines terms relating to methods of processing and heat treatment such as hot and cold working, strain hardening, annealing and partial annealing, temper, homogenizing, natural ageing, solution heated and artifically aged, precipitation heat treatment, quenching, solution heat treatment, stabilizing.

Specifies methods of measurement for gaseous pollutants emitted by motorcycles as defined in ISO 3833, equipped with a 4-stroke, a 2-stroke or a rotary controlled ignition engine. Defines a driving cycle in accordance with the requirements of different types of motorcycles and provides specifications of the collecting methods for gaseous pollutants, a measuring system and a test bench.