Rechercher

Specifies a procedure using an ammonia-sensing membrane probe for raw and waste water and sewage. The procedure is applicable to ammonium nitrogen concentration of up to 50 mg/l.The limit of detection is defined as the limit of Nernstian response under the conditions specified and has a value corresponding to approximately 0,2 mg/l.

Specifies requirements for kernels from Prunus mahaleb Linnaeus, for human consumption. It defines relevant terms, shows special requirements, such as odour, taste, freedom from moulds, insects etc., extraneous matter, moisture content, further it descibes sampling, methods of test, packing and marking. an annex A provides the determination of damaged kernels etc. An annex B describes the…

Defines the machining processes that can be carried out on these milling machines, and describes the different types of machines. This part also gives a nomenclature for the main elements of the machine (in English, French and Russian as well as equivalent terms in German, Italian, Dutch, Spanish and Swedish).

Specifies requirements for nuts from Pinus pinea Linnaeus, for human consumption. It does not apply to roasted or processed nuts. It defines relevant terms, shows special requirements, such as odour, taste, freedom from moulds, insects, etc., extraneous matter, moisture constent, further it describes sampling, methods of test, packing and marking. An annex A provides the determination of damaged…

Applies to motor vehicles other than passenger cars (as defined in Section 2 of the Motor Vehicle Safety Regulations), designed and manufactured, or converted, for the purpose of transporting physically disabled persons. This standard specifies the design and manufacture of the basic vehicle, lifts and ramps, methods of securing wheelchairs and other aids, the methods of restraining…

Specifies conditions of temperature and relative humidity for general use. The test is applicable to coating materials in liquid or powder form, to wet or dry films, and their raw materials. The conditioning atmosphere and the test atmosphere are defined. This third edition cancels and replaces the second edition ISO 3270-1980.

Three methods of determining the number of threads per centimetre are included, any of which may be used, the choice depending on the character of the fabric. The principles are as follows: Method A: A section of fabric of dimension specified is dissected and the number of threads counted. The treads that are to be counted are preferably short, 1 or 2 cm being suitable. Method B: the number of…

This part defines the measuring principles to be used for measuring piston rings. Applies to piston rings up to and including 200 mm diameter for reciprocating internal combustion piston engines. May be used for piston rings for compressors working under analogous conditions. Several figures illustrate shapes and reference quantities of concern.

Applies to string insulator units of the cap and pin and long rod types and their associated metal fittings for overhead lines. Includes six standard sizes designated by the nominal pin diameters which form the basis of the standard. Defines each standard size by the dimensions of the pin ball, of the socket and the hook-on 'Go' gauge. States dimensions of twin-balled pins for coupling…

Applicable to locking devices used with ball and socket couplings of string insulator units and used with the corresponding metal fittings standardized in IEC 60120. -Defines the shapes and some standard dimensions for locking devices as well as the test methods for locking devices; -States the acceptance conditions for supply and gives other dimensions for guidance of manufacturing only.…