Railway components — Technical delivery requirements — Part 4: Untreated steel nuts and bolts and hi...
This part of ISO 6305 defines the specifications regarding product quality and the conditions of acceptance for nuts and bolts. Gives manufacturing and acceptance conditions, data to be supplied by the purchaser and packaging. Annexes A to D contain progressive sampling plans.
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensio...
ISO5414-1 was first publisded in 1982. This second edition cancels and replaces the first edition. Lays down dimensions of the driving system and also the maximum diameter of the chuck nose. Defines two types of drive (chucks for driving parallel shank tools with a single flat or with a double flat).
Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — Gene...
This second edition cancels and replaces the first edition (1980). Specifies the nature, the method of application, the surface condition and the minimum thickness of internal linings for pipes as defined in ISO 2531 and ISO 7186. Tabulates nominal sizes from DN 40 up to and including DN 2600.
1. Scope
1.1 This Standard provides a testing procedure for defining a minimum level of structural adequacy and performance capability for running gear used under trailers, sectional homes, and mobile homes, but excludes trailers equipped with full air brakes or vehicles not required to be licensed for highway use.
1.2 This Standard covers general requirements and performance tests…
Magnetic materials. Part 8: Specifications for individual materials. Section Three: Specification fo...
Defines the grades of cold-rolled magnetic non-oriented non-alloyed steel strip delivered in the semi-processed condition, that is without final heat treatment, of 0.50 mm and 0.65 mm nominal thickness. Specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.
Magnetic materials. Part 8: Specifications for individual materials. Section Two: Specification for ...
Defines the grades of cold-rolled magnetic non-oriented alloyed steel strip delivered in the semi-processed condition, that is without final heat treatment, of 0.47 mm, 0.50 mm and 0.65 mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.
Asbestos-cement ventilation ducts and fittings — Dimensions and characteristics
Applies to asbestos-cement straight ducts and their fittings used for ventilation purposes, with cross-sections up to 300 mm. Specifies also methods for checking the dimensions and defining the principal characteristics and acceptance tests applicable to these products.
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
Specifies classes of dimensional tolerances and test methods for the measurement of dimensions. Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 1 and 2 of this standard deal with the requirements for hardness, and the…
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheomete...
Specification of a method for determining the apparent viscosity, at high shear, of polyvinylchloride pastes prepared from polyvinylchloride polymers and plasticizers. It applies in particular to "standard pastes" according ISO 4612. Placing of a sample in a Severs rheometer and setting of the jacket to a defined temperature. Measurement of the flow rate of the paste through a…
