Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology
This International Standard describes the basic principles for the expression of dimensional
deviation in building, and defines the basic terms and definitions relating to the evaluation,
specification and verification of accuracy.
It is applicable to the manufacture of building components (standard or purpose made), the
setting out process, erection and assembly, and the building as a whole.…
Scope
Part I
1.1 Except as provided for in Clause 1.2, this Standard applies to all boilers, pressure vessels, fittings, and piping, as provided for by the Act and defined in this Standard.
Notes:
(1) In certain provinces there may be variations in size limitations quoted in this Standard. Consultation with the regulatory authority is recommended.
(2) Cylinders, spheres,…
1. Scope
1.1
Except as provided for in Clause 1.2, this Standard applies to all boilers,
pressure vessels, fittings, and piping, as provided for by the Act and defined
in this Standard.
Notes:
(1) In certain provinces there may be variations in size limitations quoted in
this Standard. Consultation with the regulatory authority is recommended.
(2) Cylinders, spheres, tubes, and drums…
High-Pressure Cylinders for the Onboard Storage of Natural Gas as a Fuel for
Automotive Vehicles
1. Scope
1.1
This Standard sets out minimum requirements for serially produced light-weight
refillable gas cylinders, original equipment and conversions, having a water
capacity exceeding 20 L (1220 in³) but not exceeding 1000 L(35.5 ft³). The
cylinders are intended only for the onboard storage of high-pressure compressed
natural gas as a fuel for automotive vehicles to which the…
Standard for Mineral Fibre Thermal Insulation for Buildings
1. SCOPe
1.1 This standard applies to mineral fibre thermal insulation manufactured in
the form of faced and unfaced batts, rolls, boards and sheets. Where facings
are used, they shall be either permeable or vapour retarding membranes, as
defined in Table 1 for Types 2 and 3, respectively. This standard does not
permit the application of kraft paper facings on batts and rolls. It also…
Corrigendum 1 - Fibre optic connector interfaces - Part 6: Type MU connector family
Defines the standard interface dimensions for type MU family of connectors which is a miniature single-position plug characterized by a cylindrical, spring loaded butting ferrule and a push-pull coupling mechanism.
Information technology equipment - Immunity characteristics - Limits and methods of measurement
Defines the immunity test requirements for information technology equipment (ITE, as defined in CISPR 22) in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges (ESD). Procedures are defined for the measurement of ITE and limits are specified which are developed for ITE and within the frequency range from 0 Hz to 400GHz.This publication…
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and...
Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results.
Has the status of a group safety publication in accordance with IEC Guide 104.
Information technology — Hypermedia/Time-based Structuring Language (HyTime)
This International Standard defines a language and underlying model for the representation of “hyperdocuments” that link and synchronize static and dynamic (time-based) information contained in multiple conventional and multimedia documents and information objects. The language is known as the “Hypermedimime-based Structuring Language”, or “HyTime”.
HyTime can represent time in both the abstract…