Rechercher

This part of ISO/IEC 14598 provides requirements and recommendations for the practical implementation of software product evaluation when several parties need to understand, accept and trust evaluation results. In particular, it may be used to apply the concepts described in ISO/IEC 9126. The process described in this part of ISO/IEC 14598 defines the activities needed to analyse evaluation…

1. Scope and Objectives 1.1 Scope This Standard applies to suspension and dead-end composite insulators used on ac overhead transmission lines with a nominal voltage 69 kV or greater and a frequency not greater than 100 Hz. 1.2 Ojectives The objectives of this Standard are to (a) define the terms used; (b) define insulator characteristics (mechanical, electrical, and dimensional) and…

Establishes requirements to be complied with by manufacturers in the design and construction of electron accelerators for use in radiotherapy and defines type tests and site tests. Places limits on the degradation of equipment performance beyond which it can be presumed that a fault condition exists and where an interlock then operates to prevent continued operation of the equipment.

This part of IS0 10303 specifies the resource constructs to specify the actions or potential actions to effect a process. The integrated resource constructs within this part of IS0 10303 define the structure for specifling: relationships between processes, the effectivity of a process, the properties of a process, the resources required for the process, the properties of the resource, the…

This part of ISO 12210 provides specific requirements for anchoring devices for in-service and out-of-service conditions for jib cranes as defined in ISO 4306-1, other than tower cranes, mobile cranes and railway cranes that are otherwise generally covered by other parts of ISO 12210.

A PAS is a technical specification not fulfilling the requirements for a standard, but made available to the public and established in an organization operating under given procedures. IEC-PAS 61883-6 was submitted by the 1394 Trade Association. Applies to all modules or devices which have any kind of audio and/or music data processing, generation and conversion function blocks. All modules or…

1. Scope 1.1 This Standard applies to apparatus, including apparatus intended for professional use, that is used to transmit, receive, and process electronic signals and signals of vocal, musical, or visual origin, and which is not necessarily under the jurisdiction of a skilled person. Processing of electronic signals includes amplification, modulation, demodulation, encoding, decoding…

1. PURPOSE AND SCOPE 1.1 This method describes the burning behaviour tests from the CAN/CGSB-4.2 No. 27 Series and recommends which should be used to determine the burning behaviour of different products under various defined conditions. 1.2 The testing and evaluation of a product against this method may require the use of materials and/or equipment that could be hazardous. This…

Enables the measure of the bit-rate tolerance of the fibre optic digital subsystem under specified conditions. Bit-rate tolerance is defined by the clock frequency range of the fibre optic digital subsystem which meets the specified bit error ratio.

Limited to automatic functions relating to light input from teh lens and to the electronic output from videio cameras and the video camera portions of camera recorders. Defines test patterns, measurement conditions, methods of measurement and the presentation of measured results so as to make possible the comparison of the measurement results.