Rechercher

1. Scope 1.1 This Standard applies to motor vehicles other than passenger cars (as defined in Section 2 of the Motor Vehicle Safety Act (Canada)) designed and manufactured, or converted, and equipped for the purpose of transporting persons with physical disabilities. 1.2 This Standard specifies (a) the design and manufacture of the vehicle, lifts, and ramps; (b) the mobility aid location and…

1. Scope 1.1 This Standard establishes a basic, uniform system of area measurements to facilitate meaningful comparisons between health care facilities throughout Canada, and for executing those procedures (eg, space programming, design, administration, funding of capital programs, etc) that require such measurements. 1.2 The measurement techniques established by this Standard apply to both…

Defines the GRAFCET specification language for the functional description of the behaviour of the sequential part of a control system. Specifies the symbols and the rules for the graphical representation of this language, as well as for its interpretation. Is primarily for automated production systems of industrial applications. It has the status of a horizontal standard in accordance with IEC…

Applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. Describes the methods of measurement and specified limits applicable to sound and television receivers and to associated equipment with regard to their immunity characteristics to disturbing signals. This standard is also…

Defines a standard test method to assess the ability of components (essentially connectors) to be stored and/or to function in a specified manner under specified conditions of low air pressure, for example high altitude.

Defines a standard test method to assess the ability of an electromechanical component (essentially a connector) to be used under specified voltage conditions without showing partial discharges.

Defines a standard test method to assess the ability of components (essentially connectors) to function in a specified manner, during and after subjection to the conditions which prevail in an aircraft during ascent and descent, but which are particularly severe in unheated and/or unpressurized zones.

Defines a standard test method to assess the ability of components (essentially connectors) to be stored and/or to function in a specified manner under conditions of high relative humidity.

Defines a standard test method to assess the ability of components (essentially connectors) to withstand rapid change of temperature in air such as might occur during storage, transportation and use.

Defines a standard test method to assess the ability of components (essentially connectors) to withstand specified severities of shock.