Rechercher

Defines the immunity test methods and range of recommended basic test levels for electrical and electronic equipment with rated current up to 16 A per phase at disturbance frequencies up to and including 2 kHz (for 50 Hz mains) and 2,4 kHz (for 60 Hz mains) for harmonics and interharmonics on low voltage power networks. Establishes a common reference for evaluating the functional immunity of…

Specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipment for consumer use. Defines the different modes of operation relevant for the measurement of power consumption.

Describes the calculation procedure for converting the data generated by chemical analysis in IEC 60695-7-50 into predicted toxic potency data for material tested under defined conditions. This is in order to estimate the contribution of the fire effluent of an end-product or material to the toxic threat to life of the total fire effluent resulting from a fire scenario in which the end-product or…

Describes the discharge current waveforms used to define the MM and the basic equipment requirements used to develop these waveforms. Test parameters are defined for testing and classifying the electrostatic discharge (ESD) sensitivity of non-powered devices to the MM. The purpose of this standard is to establish a test model that will replicate MM failures and will define the MM transient…

This part of ISO 7637 defines the basic terms relating to electrical disturbances from conduction and coupling used in its other parts, and gives general information on the whole of ISO 7637 and common to all parts.

This International Standard specifies the guidelines and principles that serve as the basis for the development of the parts of ISO 15930 that define the use of the Portable Document Format (PDF) in various graphic technology applications.

This sectional specification relates to IEC 61156-1: Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification. The cables described herein are specifically intended to construct patch, equipment, and work area cords for class D, E and F channels, as defined in IEC 11801:2000, Information technology Generic cabling for customer premises (see Table 1).

Describes the discharge current waveforms used to define the HBM and the basic equipment requirements used to develop these waveforms. Test parameters are defined for testing and classifying the electrostatic discharge (ESD) sensitivity of non-powered devices to the HBM. The purpose of this standard is to establish a test model that will replicate HBM failures and will define the HBM transient…

This sectional specification relates to IEC 61156-1: Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification. The cables described herein are specifically intended for horizontal floor wiring in class D, E and F channels, as defined in ISO/IEC 11801:2000, Information technology Generic cabling for customer premises (see Table 1).

This Technical Specification, in conjunction with ISO 9001:2000, defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products. This Technical Specification is applicable to sites of the organization where customer-specified parts, for production and/or service, are manufactured. Supporting…