Rechercher

ISO 15709:2002 gives a simplified theory of the physics of soil water in the unsaturated zone and defines a set of terms, quantities, units and symbols used in the field of soil physics investigation of the unsaturated zone. ISO 15709:2002 is applicable only to standards on soil physical investigations of the unsaturated zone (including swelling soils) elaborated within ISO/TC 190. ISO 15709:2002…

ISO 2351-3 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers as defined in ISO 2936. It gives also recommended combinations between tips and bits.

ISO 2351-1 prescribes the technical specifications for machine-operated screwdriver bits for slotted head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers Type C as defined in ISO 2380-1. It also gives recommended combinations between tips and bits.

ISO/TS 15077 gives the preferred method of operation, together with recommendations and requirements for the actuation, displacement and location, of operator controls installed on tractors and self-propelled machinery used in agriculture and forestry. It provides design guidance on actuation forces for hand and foot controls in relation to their displacement, frequency of use and location, and…

This document identifies two basic measurement methods for characterising the spectral transfer functions of DWDM filter components as defined in IEC 62074-1. The transfer functions can be used to produce measurements of attenuation (A), polarisation dependent loss (PDL), isolation, centre wavelength, and bandwidth (BW).

ISO 6743-99:2002 establishes a general system of classification, which appliies to lubricants, Industrial oils and related products, designated by the prefix letter "L". Within class L, 18 families of products are defined, according to the application areas of each, so as to cover, as much as possible, all the applications where lubricants, industrial oils and related products are used…

1 Scope "These requirements cover rating, and performance during fire tests, of fire extinguishers intended for use in attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover performance during fire tests of fire extinguishing agents for application on Class D fires. The ultimate rating of an extinguisher or the prescribed use of an extinguisher or fire…

Specifies a general-purpose, tall-channel model (GPM-TC) which can be used for the evaluation of wire-wound electrical insulation systems (EIS) where the general-purpose model (GPM) defined in IEC 61857-21 does not offer sufficient space for the electrical insulating materials (EIM) and/or winding wire to be evaluated.

ISO 2351-2 prescribes the technical specifications for machine-operated screwdriver bits for cross-recessed head screws. It applies to bits with male hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to tips for screwdrivers as defined in ISO 8764-1. It also gives recommended combinations between tips and bits.

Applies to instrumentation intended for measuring spectral components in the frequency range up to 9 kHz which are superimposed on the fundamental of the power supply systems at 50 Hz and 60 Hz. For practical considerations, this standard distinguishes between harmonics, interharmonics and other components above the harmonic frequency range, up to 9 kHz. Defines the measurement instrumentation…