Rechercher

ISO 18213-6:2008 specifies a procedure for making accurate determinations of the densities of process liquids from in-tank measurements of the liquid content. This procedure is applicable to tanks equipped with pneumatic systems for determining the liquid content that have two or more bubbler probes of differing lengths. The probes must be fixed relative to each other and to the tank in which…

ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium. ISO 10414-1:2008 provides additional test…

ISO/TS 17837|IDF/RM 25:2008 specifies a method for the determination of the nitrogen content and crude protein content by calculation in processed cheese products by using the Kjeldahl principle, both traditional and block digestion methods.

ISO 27107:2008 specifies a method for the potentiometric end-point determination of the peroxide value, in milliequivalents of active oxygen per kilogram, of animal and vegetable fats and oils. The method is applicable to all animal and vegetable fats and oils, fatty acids, and their mixtures, with peroxide values from 0 meq to 30 meq of active oxygen per kilogram. It is also applicable to…

ISO 14127:2008 specifies methods for calculating the resin, fibre and void contents of a carbon-fibre-reinforced composite from the densities of the resin, the fibre and the composite and the mass of fibre in the composite (method A) and for calculating the fibre content from the thickness of the composite (method B). Method A specifies three different resin removal procedures for the…

1. SCOPE 1.1 This standard sets out minimum requirements to be used when selecting uniformed security officers and supervisors to protect people, property and information. It provides a "Security Officers Basic (Pre-assignment) Training Program" (Appendix A), a "Security Officer Supervisors (Pre-assignment) Training Program" (Appendix B) and "Performance Guidelines for…

ISO 15930-7:2008 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination of digital data intended for print reproduction. Where all elements necessary for final print reproduction are contained within the file it is designated as PDF/X-4. If a required ICC profile is externally supplied and unambiguously identified, it is designated as PDF/X-4p. Colour-managed,…

This part of IEC 61000 provides guidance on principles which can be used as the basis for determining the requirements for the connection of unbalanced installations (i.e. three-phase installations causing voltage unbalance) to MV, HV and EHV public power systems (LV installations are covered in other IEC documents). For the purposes of this report, an unbalanced installation means a three-phase…

IEC 62024-1:2008 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range. This edition includes the following significant technical changes with respect to the previous edition:<br /> a) sizes 0402 added in Table 1 and Table 2;<br /> b) contents of 4.4 reviewed for easier…

IEC 62024-1:2008 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range. This edition includes the following significant technical changes with respect to the previous edition: a) sizes 0402 added in Table 1 and Table 2; b) contents of 4.4 reviewed for easier understanding; c) correct errors in…