Rechercher

This National Standard of Canada is based on International Standard IEC 61241-1-1:1999. 1 Scope This part of IEC 61241 is applicable to electrical apparatus protected by enclosures and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. It specifies requirements for design, construction and testing…

1 Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 ampere s and up to 600 volts ac or dc, and which may include two or fewer pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC) and…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60730-2-8:2000. 1. Scope This clause of part 1 is replaced as follows: Replacement: 1.1 This part 2-8 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a…

This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-3:1997. 1 Scope This part of lSO/IEC 7816 specifies the power and signal structures, and information exchange between an integrated circuit(s) card and an interface device such as a terminal. It also covers signal rates, voltage levels, current values, parity convention, operating procedure,…

This National Standard of Canada is based on International Standard CEI/IEC 61112: 1992 (first edition, 1992-12) including Corrigendum (dated May 2000). 1. Scope This International Standard is applicable to insulating blankets for the protection of workers from accidental contact with live or earthed electrical conductors, apparatus or circuits and avoidance of short circuits on a.c. and d…

This National Standard of Canada is based on International Standard IEC 60335-2-42:2000 (fourth edition, 2000-03) 1. Scope This clause of part 1 is replaced by: This standard deals with the safety of electrically operated commercial forced convection ovens, steam cookers, steam-convection ovens and, exclusive of any other use, steam generators, not intended for household use, their rated…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-9:1996, (second edition, 1996-10). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard specifies the particuar requirements for the safety of DOSEMETERS used in medical practice in the PATIENT ENVIRONMENT for RADIOTHERAPY…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-4-4:1995, first edition, 1995-01, including Amendment 1:2000. This International Standard relates to the immunity requirements and test methods for electrical and electronic equipment to repetitive electrical fast transients. It additionally defines ranges of test levels and establishes test procedures.…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions),hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with liquified petroleum (propane); c. direct vent appliances for manufactured home (USA only) or mobile home OEM installation…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10173:1998. 1 Scope This International Standard specifies the 8-contact connector (plug and jack) and the assignments of its contact numbers for use in the physical interfaces of Integrated Services Digital Network (ISDN) primary rate access services conforming to ITU-T Recommendation I.431. In this…