Matériels et systèmes de téléconduite - Partie 6: Protocoles de
téléconduite compatibles avec les n...
Définit le profil fonctionnel qui fournit le service de transport en mode connexion dans un système d'extrémité connecté par un accès permanent à un réseau de commutation de paquets.
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 5: Limitation of voltage fluctuations...
The recommendations in this Technical Report are applicable to electrical and electronic equipment intended to be connected to a public low-voltage a.c. distribution system, where the equipment has a rated input current exceeding 16 A per phase, or has a lower rated current, but requires the special consent of the supply authority.
This publication has the status of a technical report - type 2
Information technology — Open Systems Interconnection — Connection-oriented presentation protocol: P...
Cancels and replaces the first edition (1988). Specifies procedures for the transfer of data and control information from one presentation-entity to a peer presentation-entity; the means of selecting, by means of functional units, the procedures to be used by the presentation-entities; the structure and encoding of the presentation-protocol-data-units used for the transfer of data and control…
Information technology — Microprocessor systems — Futurebus+ — Logical protocol specification
Specifies the logical layer for a set of signal lines that constitute a multiple segment bus architecture, and for the interfacing of modules connected to a bus segment. Intended to be used as a component within a profile to build systems with higher levels of compatibility.
Information technology - Microprocessor systems - Futurebus+ - Logical protocol specification
Specifies the logical layer for a set of signal lines that constitute a multiple segment bus architecture, and for the interfacing of modules connected to a bus segment. Intended to be used as a component within a profile to build systems with higher levels of compatibility.
Information technology - Open Systems Interconnection - Connection-oriented presentation protocol: P...
Cancels and replaces the first edition (1988). Specifies procedures for the transfer of data and control information from one presentation-entity to a peer presentation-entity; the means of selecting, by means of functional units, the procedures to be used by the presentation-entities; the structure and encoding of the presentation-protocol-data-units used for the transfer of data and control…
Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Di...
Specifies dimensions and specific requirements for the 15-pole connector and its contact allocation to enable electrical connection between commercial towing vehicles and their trailers equipped with 24 V systems to be made and to ensure interchangeability. Further specifies a park socket used to receive and store the plug when it is disconnected. Annex A specifies characteristics of two adaptors…
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations...
This section of IEC 61000-3 is concerned with the limitation of voltage fluctuations and flicker impressed on the public low-voltage system. It specifies limits of voltage changes which may be produced by an equipment tested under specified conditions and gives guidance on methods of assessment. This section is applicable to electrical and electronic equipment having an input current up to and…
1. Scope
1.1
This Standard prescribes the minimum requirements for telecommunications
premise wiring systems installed within the family units of a building that is
used primarily for residential use (single-family, multi-occupant, or
multi-unit). The installation of the wiring is to be used in accordance with
the Rules of the Canadian Electrical Code, Part 1. The wiring system is to be…
Grounding and Bonding for Telecommunications in Commercial Buildings
2 Scope
2.1 General
2.1.1 This Standard specifies the requirements for a uniform
telecommunications grounding and bonding infrastructure that shall be followed
within commercial buildings where telecommunications equipment is intended to
be installed.
2.1.2 This telecommunications grounding and bonding infrastructure in
conjunction with other grounding and bonding systems (e.g.,…
