Rechercher

This National Standard of Canada is based on International Standard IEC/TR 61400-24:2002. 1 Scope During the last few years, all major wind turbine manufacturers have made dedicated efforts towards developing adequate lightning protection systems, and the first experiences with these new designs are beginning to be seen. It is therefore reasonable at this time to consider and prepare for a…

ISO 14813-1:2007 provides a definition of the primary services and application areas that can be provided to Intelligent Transport System (ITS) Users. Those with a common purpose can be collected together in ITS service domains, and within these there can be a number of ITS service groups for particular parts of the domain. ISO 14813-1:2007 identifies 11 service domains, within which numerous…

1.1 This Standard sets forth minimum requirements for hose and hose assemblies, including vapour recovery hose and assemblies, for use on dispensing devices for flammable and combustible liquids. For the purpose of this Standard flammable and combustible liquids mean gasoline, fuel oil, kerosene and diesel fuel, including gasoline with small amounts of additives such as detergents, solvents for…

CSA Preface This is the first edition of CSA T568.2, Commercial building telecommunications cabling standard - Part 2: Balanced twisted-pair cabling components. It replaces T529-95, Telecommunications Cabling Systems in Commercial Buildings. This Standard is an adoption of the identically titled ANSI/TIA/EIA (American National Standards Institute/Telecommunications Industry Association/…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 8802-1:2001. 1 Scope This technical report provides an introduction to the set of International Standards which describe local area networks, specifically those which make use of the 48-bit MAC address format. The MAC technologies described in this technical report have in common the ability to provide…

Specifies requirements for product interoperability in the area of home and building automation systems, with sufficient detail needed to design interoperable Home Electronic System products. The widespread development of many national standard and proprietary networks within and to the home has necessitated a standard for interoperability among home system applications and products from multiple…

Specifies requirements for product interoperability in the area of home and building automation systems, with sufficient detail needed to design interoperable Home Electronic System products. The widespread development of many national standard and proprietary networks within and to the home has necessitated a standard for interoperability among home system applications and products from multiple…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 21890:2001 (first edition, 2001-10-01). 1 Scope The purpose of this Technical Report is to investigate the interoperability of Private Integrated Services Networks (PISNs) and Internet Protocol (IP) networks, with a view to identifying possible scenarios for interoperation, problems that will have to be solved…

This National Standard of Canada is equivalent to International Standards ISO/IEC 14519:2001 / IEEE Std 1003.5, 1999 (second edition, 2001-12-15). 1.1 Scope This standard defines a set of system application program interfaces to operating system services. These interfaces provide access via the Ada programming language to the same operating system services for which C-language interfaces are…

Determines the layout and style for detail specifications describing multicore and symmetrical pair(s)/quad(s) cables for digital communication in work area wirin. Detail specifications based on the blank detail specification may be prepared by a national standards organization, a manufacturer or a user.