Rechercher

1 Scope 1.1 This Part is intended to be read together with the Standard for Low-Voltage Fuses – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Low-Voltage Fuses – Part…

1.1 These requirements cover automatic sprinklers including conventional, spray, sidewall, extended coverage, residential, certain specific application sprinklers and storage sprinklers including early suppression fast response (ESFR) intended for installation on sprinkler systems for fire-protection service. Requirements for the installation and use of sprinklers are included in the National…

1.1 Les présentes exigences couvrent les gicleurs, y compris les gicleurs classiques, à pulvérisation, muraux, à couverture étendue, résidentiels, certains gicleurs pour applications particulières et gicleurs d’entreposage, y compris les gicleurs à réponse rapide pour extinction hâtive (ESFR), destinés à être installés sur des systèmes de gicleurs pour service de protection contre l’incendie.…

This document specifies the procedures and acceptance criteria for manufacturing tests and examinations (sometimes called "initial inspection and tests") of valves designed and type tested in accordance with ISO 10297. This document is applicable to: a) cylinder valves intended to be fitted to refillable transportable gas cylinders; b) main valves (excluding ball valves) for cylinder…

This document establishes the basic principles for the determination of deformations of buildings at the serviceability limit state when formulating national standards and recommendations. This document contains information on how serviceability for buildings and building elements is dealt with in some national standards.

This National Standard of Canada applies to glazing materials that have been subjected to the test methods described herein. Such test methods are intended to demonstrate minimum performance characteristics designed to reduce the likelihood of cutting and piercing injuries resulting when glazing materials used in areas of human impact (see Annex A) in building and architectural applications…

1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 1 - Instantaneous water heaters incorporating bare heating…

This document specifies a numbering system and registration procedure for identifying both healthcare application providers and health card holders in order to exchange information through the use of cards issued for healthcare services. This document focuses on the machine-readable cards of ID-1 type defined in ISO/IEC 7810 that are issued for healthcare services provided in a service area that…

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic testing; e) penetrant testing; f) radiographic testing; g) strain gauge testing; h) thermographic testing; i)…

IEC 60335-2-10:2021 deals with the safety of electric floor treatment and wet scrubbing machines intended for household and similar purposes, their rated voltage being not more than 250 V, including direct current (DC) supplied appliances and battery-operated appliances. Examples of floor treatment machines that this standard is applicable to are – floor buffers; – floor polishers; – floor…