Rechercher

This National Standard of Canada is equivalent to International Standard ISO 14184-2:1998. 1 Scope This standard specifies a method for determining the amount of formaldehyde released under the conditions of accelerated storage from textiles in any form by means of a vapour absorption method. The procedure is intended for use in the range of releasable formaldehyde on the fabric between 20 mg/…

This National Standard of Canada is equivalent to International Standard ISO 19903:2006. 1 Scope This International Standard specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries, and specifically addresses a) the design, construction, transportation and installation of new structures, including…

1. SCOPE 1.1 These requirements apply to materials for the fabrication of air duct systems for use in accordance with the requirements of the current edition of the National Building Code. The materials covered by these requirements include preformed lengths of flexible or rigid ducts, materials in the form of boards for field fabrication of lengths of rigid ducts, and preformed flexible…

ISO 21930:2007 provides the principles and requirements for type III environmental declarations (EPD) of building products. ISO 21930:2007 contains specifications and requirements for the EPD of building products. Where this International Standard contains more specific requirements, it complements ISO 14025 for the EPD of building products. ISO 21930:2007 provides a framework for and the basic…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel non- pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating fuel and/or generator fuel; and B Lubricating oil. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…

1. DOMAINE D'APPLICATION 1.1 La présente norme porte sur la conception et la construction de réservoirs non pressurisés non enterrés en acier destinés à être installés à l'intérieur ou à l'extérieur de bâtiments et au stockage de : A Liquide combustible destiné à être utilisé comme huile de chauffage ou huile pour génératrice; B Huile lubrifiante. REMARQUE 1 : Ces…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2,…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5,…

1 Scope 1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada or the National Electrical Code, NFPA 70, in the United States. 1.2 This Standard applies to the following grounding and bonding equipment: (a) ground clamps, bonding devices, grounding bushings, water-meter shunts, grounding electrodes, and…

An increasing number of international, national and industry standards describe process models. These models are developed for a range of purposes including process implementation and assessment. The terms and descriptions used in such models vary in format, content and level of prescription. ISO/IEC TR 24774:2007 presents guidelines for the elements used most frequently in describing a process:…