Rechercher

Canadian deviations International Standard IEC 60384-14:2013 (fourth edition) forms the basis for CAN/CSA-E60384-14, which contains the following deviations in addition to those shown in CAN/CSA-E60384-1:14. [Replace all references to “IEC 60384-1” with “CAN/CSA-E60384-1”] 1 General 1.1 Scope [Add the following] This Standard covers the above-noted products that are intended to be…

SCOPE 1.1 This Standard covers the design and construction of aboveground steel non-pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating fuel and/or generator fuel; and B Lubricating oil. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…

1 SCOPE 1.1 Except as described in Clause 1.7, these minimum requirements cover single and double wall cylindrical steel, non-pressure tanks of the horizontal type that are used for the underground storage of flammable liquids and combustible liquids, that are compatible with the material of construction. 1.2 These minimum requirements cover double wall tanks with provision for leak detection…

1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends, per specifications, and similar flammable or combustible liquid petroleum derivatives, such…

1 SCOPE 1.1 This Standard provides minimum requirements for nonmetallic internal retrofit systems intended for field installation in underground tanks for the storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends per specifications and similar flammable or combustible liquid petroleum derivatives, such as fuel…

1 SCOPE 1.1 This Standard covers minimum requirements for shop fabricated, aboveground fire tested tank assemblies intended for storage of flammable and combustible liquids that have a specific gravity not greater than 1.0 and that are compatible with the material of the tank. 1.2 Tank assemblies constructed to meet this standard are intended to withstand exposure to a 1 h hydrocarbon pool…

IEC 80601-2-58:2014 applies to the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery and associated accessories that can be connected to this medical electrical equipment, hereafter referred to as ME equipment. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this standard are not…

IEC 80601-2-58:2014 applies to the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery and associated accessories that can be connected to this medical electrical equipment, hereafter referred to as ME equipment. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this standard are not…

1 SCOPE 1.1 This Standard covers minimum requirements for nonmetallic tanks of the atmospheric storage type from 227 to 2500 L intended primarily for the storage and supply of heating fuel for oil burning equipment, or alternately for the storage of diesel fuels for compression ignition engines and motor oils (new and used oil) for automotive service stations, in aboveground applications. 1.…

1 SCOPE 1.1 These requirements apply to the performance in flame-exposure tests of flame-resistant fabrics of natural, synthetic, or combinations of natural and synthetic fibres, or plastic films intended for such use as tents, awnings, draperies, or decorations. The flame resistance of the fabric or film may be inherent in the material used or may be the result of chemical treatment to…