Rechercher

Domaine d'application 1.1 Ces exigences couvrent les hottes d’évacuation de cuisine commerciale de type I éventuellement placées au-dessus d’équipements de cuisson commerciale. Les hottes d’évacuation avec et sans registres d’évacuation sont couvertes par ces exigences. 1.2 Les hottes d’évacuation avec et sans registres d’évacuation automatiques déclenchés en cas de feu sont couvertes…

1 Scope 1.1 General This Standard specifies requirements for the structural design of unreinforced, reinforced, and prefabricated masonry structures and components in accordance with the limit states design method of the National Building Code of Canada. This Standard also provides requirements for the structural design of prestressed masonry beams, walls, and columns in accordance with the…

Scope 1.1 These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard for Clean Agent Fire Extinguishing Systems, NFPA 2001 and with the National Fire Code of Canada.

Domaine d'application 1.1 Les présentes exigences s'appliquent à la construction et à l'utilisation des unités de système d'extinction aux agents propres à gaz inerte conçues pour être installées, inspectées, mises à l'essai et entretenues en conformité avec la norme NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems, et avec le Code national de prévention…

Scope This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. b) used in well-ventilated surroundings, and in wick-fed illuminating lamps. a) Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CSA B140.9.3, when Type No. 2-K Kerosene is intended for use in flue-connected stoves and…

Scope 1.1 These requirements apply to factory-built gas-fired package boilers having input ratings of more than 400,000 Btu/h (117,228 W), per individual combustion chamber, having the following: a) For the United States: Inlet/supply pressures up to 15 psi (103 kPa), and intended primarily for commercial and industrial installation; b) For Canada: Inlet/supply gas pressures ?0.5 psi (3.4…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001- SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2…

Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I controls (see Figure 1 for a schematic representation). This standard does not…

1 Scope 1.1 Installation requirements for large oil-burning equipment This Code specifies minimum requirements for the installation of large oil-burning equipment. Note: The intent of this Code is to apply to multi-unit residential, commercial, institutional, and industrial buildings in accordance with the provincial building code or, in the absence of such regulation, the National Building…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 This Standard covers both permanently…