Rechercher

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.18-1984. It establishes code numbers for finishes on various basis materials. It includes criteria for viewing comparative finishes in the field to determine whether they match and establishes five categories of finishes.

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.10-1985 in total, without any modification. Requirements for this standard apply to power-operated swinging and sliding doors for pedestrian use and some small vehicular traffic. Included are provisions intended to reduce the chance of user injury or entrapment. Power-operated doors primarily for…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.13-1980. It establishes requirements for Mortise Locks and Latches and includes performance tests, security tests, operational tests, finish tests and dimensional criteria.

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.16-1981 in total, without any modification. It establishes requirements for auxiliary hardware and includes performance tests covering operational, cyclical, strength and finish criteria.

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.1-1981 in total, without any modification. Cyclical, lateral and vertical wear tests together with finish tests requiring salt spray exposures are a part of this standard. Individual hinge types are described and identified with code numbers. For full-mortise hinges, three performance levels are…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.5-1984. 1.1 This portion of ANSI/BHMA A156.5 establishes requirements for Auxiliary Bored and Mortise Locks, Rim Locks, and Cylinders and includes security tests, operational tests, finish tests, and dimensional criteria. 1.2 Tests described in this Standard are performed…

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.7-1981. It covers the requirements for the length, width, thickness, offset, and screw hole spacing for builders template hinges. Included in the standard are hinge identification symbols and screw sizes. Methods for identifying template hinges that conform to the Standard are provided.

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.20-1984. 1.1 This Standard establishes requirements for Strap Hinges, Tee Hinges, and Hasps and includes performance tests covering operational and strength criteria. 1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of…

This National Standard of Canada is equivalent to ISO/IEC Technical Report 9573. 1 Scope and Field of Application This Technical Report complements ISO 8879 by providing additional tutorial information. It is not intended, and should not be regarded, as an extension, modification, or interpretation of ISO 8879. The SGML language contains a number of components, some of which are optional…

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.4-1986. 1.1 This standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots and thresholds for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests.…