Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 335-2-53:1988. 1. Scope This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This standard applies to electric sauna heating appliances having a rated input not exceeding 20 kW. Sauna heaters may be of the thermal storage type or of the non…

1. Scope 1.1 These requirements cover steel contained tank assemblies that are used for aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Contained tank assemblies consist of primary tanks contained in steel containments having capacities of not less than 110% of the…

This National standard of Canada is equivalent to International standard ISO 8630/1:1987. This standard specifies the dimensional, physical and magnetic characteristics of the cartridge so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this standard may have been rounded off and therefore…

This National Standard of Canada is equivalent to International Standard ISo 7665:1983. This Standard specifies requirements for the file structure and the labelling of flexible disk cartridges for the interchange of information between users of different information processing systems. This Standard specifies a) recorded labels to identify files, file sections, and volumes of flexible…

This National standard of Canada is equivalent to International standard ISO/IEC 9983:1989. This Standard specifies an identifier to appear on each flexible disk cartridge (FDC) and the minimum information to appear on packages of unrecorded flexible disk cartridges. The information according to this Standard shall appear on cartridges and on packages of unrecorded flexible disk…

This National Standard of Canada is equivalent to International standard ISo 9529/2:1989. This Standard specifies the track layout, the track format and the characteristics of the recorded signals. Note - Numeric values in the SI and/or Imperial measurement system in this Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either…

This National Standard of Canada is equivalent to International standard ISo 9529/1:1989. This standard specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this standard may have been rounded off and therefore…

This National Standard of Canada is equivalent to the International standard ISO 5654/2:1985. This standard specifies the quality of recorded signals, track layout and the track format to be used on the above-mentioned flexible disk cartridge which is intended for data interchange between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this…

This National Standard of Canada is equivalent to International Standard ISo 7065/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 200 mm (8 in) flexible disk cartridge, recorded at 13 262 ftprad on both sides using modified frequency modulation recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per…

This National Standard of Canada is equivalent to International Standard ISo 6596/1:1985. This standard specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded and…